Motor dies doing 80 mph for no reason. Updated on page 2
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Outside of the Loop-ATL
Posts: 761
Total Cats: 1
Motor dies doing 80 mph for no reason. Updated on page 2
So I am sitting on the side of the road waitting to tow the car back home
I was driving out of boost just cruising at 80 ish when the car bucks real quick and the tach bouncses for a second. I look back see a small blackish cloud of smoke and then the car dies. Got to the side of the road. Try to start her again and I get nothing. Motor turns but no start. Finally get a small start and try to give it throttle and she dies again. Oh all the stock gauges were reading fine. No wideband in the car so no help there.
If any one has any idea of what to look for that be help
Oh car is a 91 with a 99 short block and 94 head and fm3 diy turbo kit
I was driving out of boost just cruising at 80 ish when the car bucks real quick and the tach bouncses for a second. I look back see a small blackish cloud of smoke and then the car dies. Got to the side of the road. Try to start her again and I get nothing. Motor turns but no start. Finally get a small start and try to give it throttle and she dies again. Oh all the stock gauges were reading fine. No wideband in the car so no help there.
If any one has any idea of what to look for that be help
Oh car is a 91 with a 99 short block and 94 head and fm3 diy turbo kit
Last edited by wildfire0310; 03-25-2009 at 09:52 AM. Reason: updateing the title
#5
Why do people invest thousands in building a car and can't spend up to $200 for a wideband?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#6
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Outside of the Loop-ATL
Posts: 761
Total Cats: 1
That is cause I am waiting on my damn refund so I can get a wideband and a Megasquirt. It is the next thing I buy for the car.
I still have 3/4 of a tank of gas. The belt looks great, still has tension.
Small up date. I got the car to idle once but as soon as I gave it gas the motor died.
The car is finally home so after i eat some I am going to hunt down everything.
I'll do some checking of everything.
#10
ah, FMU could be issue too. Either way, I'd think it'd be fuel delivery. If you could get it to start and idle, even just once, your spark and all electronics should be fine. If you hit the gas and it died, that indicates either a fuel problem or MAF is broken. You could unplug your coils and see if the plugs are wet after cranking. If they are, fuel may be ok and your ECU just doesn't know how much to put in.
#13
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Outside of the Loop-ATL
Posts: 761
Total Cats: 1
ok yea I planned after dinner to check for any codes. Also going to look for spark.
I try jumping the F/P and GND to check the pump.
Also yea no cat to have cogged and the exhaust is basically just a mild pipe right after the downpipe. Nothing really thing lol
I try jumping the F/P and GND to check the pump.
Also yea no cat to have cogged and the exhaust is basically just a mild pipe right after the downpipe. Nothing really thing lol
#14
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
CAS - when starting you should see an rpm signal in megatune. no reading, no cas. you will get no spark and no fuel
Coilpack - obviously no spark. spark plugs will be wet with fuel
Fuel pump - you will still have spark but no fuel.
I just asked Milton and he bets $5 it's your CAS. Remember, no spark, no fuel = CAS.
Coilpack - obviously no spark. spark plugs will be wet with fuel
Fuel pump - you will still have spark but no fuel.
I just asked Milton and he bets $5 it's your CAS. Remember, no spark, no fuel = CAS.
#16
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Outside of the Loop-ATL
Posts: 761
Total Cats: 1
well update...
just went and pulled the codes and check the fuel pump.
I got two codes.. one is for the evap system that been gone for years and a new one code 2 Ne Signal. Time to do some searching. Also the pump turned on just fine.
just went and pulled the codes and check the fuel pump.
I got two codes.. one is for the evap system that been gone for years and a new one code 2 Ne Signal. Time to do some searching. Also the pump turned on just fine.
#17
I had a issue just like this awhile back. Car would start and idle but as soon as I touched the throttle it died. I was thinking it was one of my fuel pump relays.
I swapped in my MSPNP and removed the AFM. Problem was gone after that. So I figured it was my AFM that **** itself.
Goodluck!
I swapped in my MSPNP and removed the AFM. Problem was gone after that. So I figured it was my AFM that **** itself.
Goodluck!
#18
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Outside of the Loop-ATL
Posts: 761
Total Cats: 1
I had a issue just like this awhile back. Car would start and idle but as soon as I touched the throttle it died. I was thinking it was one of my fuel pump relays.
I swapped in my MSPNP and removed the AFM. Problem was gone after that. So I figured it was my AFM that **** itself.
Goodluck!
I swapped in my MSPNP and removed the AFM. Problem was gone after that. So I figured it was my AFM that **** itself.
Goodluck!
I am starting to wonder if maybe the wiring wiggled lose. Since everyone on M.net was saying either the CAS is bad or wiring. I am wondering if the wiring from when I extended the CAS has wiggled lose.
Either way it is getting dark and being in an apartment complex makes it kinda hard to work on the car after house. So tomorrow after work, i am going to check my spark and tract my wiring if not just redo all of it.