Ahh, I see. Sounds good. I'm gonna try to easy therm it with the normal bias resistance of 2490 and whatever default values Braineack posted since I'm running parallel without the Bias resistor R4 & R7 installed.

Shoot, ok, i'll use those values

OK, I easythermed everything again. First was with Braineacks numbers and what I got was AIT temps that were 10 degree's below the ambient temps. I had a thermometer right beside the engine bay that confirmed it. The coolant temps were spot on. Next I tried easytherming it using the bias resistance of 2625 for both AIT and CLT. This gave values that were exactly the same as the thermometer.

Only thing that was funny was that when I started the car, the AIT values got about 3 degree's colder after about 30 secs. Why would this happen?