NA Headlight Retrofit *Picture Heavy*
So i have done some searching on here and various other places. seems that not very many people have retrofitted the NA's headlights due to space constraints... That being said, I'm giving it a shot anyway.
I found a guy that sells small 2.5" LED projectors. Bought some Jeep 7" round housings on ebay for $35. Already have the shrouds I'll be using as well as the halos. Received the housings yesterday, checked for any damage during shipping, preheated the oven. Carefully opened the housings up (took roughly 20 minutes total) and just set the shrouds in there to check for clearance. Looks like I still have some room to play with, but I'm not sure if I'd recommend using an HID projector as they might cook the plastic lens. http://i65.tinypic.com/15pg9sl.jpg http://i67.tinypic.com/nlwfhi.jpg http://i63.tinypic.com/ibxmdd.jpg Will update as build continues. |
Which 2.5" LED projectors are they? My Mazda 3 comes with a 2.5" projector from the factory, so I'm hoping to find an adequate 2.5" LED projector so I don't have to make clearance for a 3".
I'll be interested to see progress, I like seeing retrofits that aren't just simple plug and play. The pictures show up for a second then go away. Not sure if anyone else has that issue. Looks like they're hosted on photobucket, which is trash. |
Originally Posted by acedeuce802
(Post 1524560)
Which 2.5" LED projectors are they? My Mazda 3 comes with a 2.5" projector from the factory, so I'm hoping to find an adequate 2.5" LED projector so I don't have to make clearance for a 3".
I'll be interested to see progress, I like seeing retrofits that aren't just simple plug and play. The pictures show up for a second then go away. Not sure if anyone else has that issue. Looks like they're hosted on photobucket, which is trash. As far as I can see right now, any LED setup should work as long as it fits. The housings are 07-17 Jeep JK housings. I heard the lens is more curved, giving a little more room vs NA replacements. I googled the projectors that the guy is shipping me and got no results. He said he imports them because they're not for sale here (yet?), but the output shots look amazing. We will see. |
Sweet, I'm curious if they're the same ones I've inquired about on Facebook. They're likely from Aliexpress or Alibaba, which isn't a bad thing. Even companies like Morimoto just order a dozen Chinese projectors, test them, and re-brand the best ones of the bunch.
|
Very interested in this, also!! Please do share the projector choice you used. I've always wanted to do a retrofit and I hope seeing this makes me get off my butt to do it. Do the headlights you chose have plastic lenses? I imagine that makes them much easier to pop off.
|
where is the pic of the LED projectors?
i would think they will be way too deep for these sealed beam headlights. dont the round jeep LED headlights that are all over amazon and ebay fit miatas? |
Originally Posted by borka
(Post 1524591)
where is the pic of the LED projectors?
i would think they will be way too deep for these sealed beam headlights. dont the round jeep LED headlights that are all over amazon and ebay fit miatas? Yep, the Jeep lights you’re talking about should bolt right up. Plug and play though? That I do not know. |
The projectors have not arrived yet. They are due to be delivered tomorrow (Wednesday). They are smaller than all the retrofit kits from Theretrofitsource.
Yes, the Jeep LED lights fit. I saw plenty of people that have swapped them in while doing my retrofit search. I think they’re ugly and the cutoff line looks terrible. |
Originally Posted by WItata
(Post 1524611)
The projectors have not arrived yet. They are due to be delivered tomorrow (Wednesday). They are smaller than all the retrofit kits from Theretrofitsource.
Yes, the Jeep LED lights fit. I saw plenty of people that have swapped them in while doing my retrofit search. I think they’re ugly and the cutoff line looks terrible. any decent projector is 5.5-6 inches deep, these headlights are roughly 3.5-4" deep. only way to fit a normal projector would be to cut a big hole in the back of the headlight and hard mount the projector to the back with 4 bolts and seal the gaps with epoxy. |
Originally Posted by borka
(Post 1524632)
post a picture of these projectors when you receive them... i am curious. or a link to them. ?
any decent projector is 5.5-6 inches deep, these headlights are roughly 3.5-4" deep. only way to fit a normal projector would be to cut a big hole in the back of the headlight and hard mount the projector to the back with 4 bolts and seal the gaps with epoxy. |
So the projectors just got delivered to my house, but I will be at work till 4. I did a google search and even looked on Aliexpress to try and find where this guy gets them from, but it yielded no results. They're called "98K LED Projectors". Here are the pics he sent me when we were talking about them. The output shot shows a Morimoto MLED on top and these on the bottom. If anyone can do a more efficient search than I can to try and find where to buy these things, that would be awesome. 'Till then, this guy is my only source.
http://i67.tinypic.com/20sb0pj.jpg http://i67.tinypic.com/2dqvex.jpg |
That looks interesting, im tempted to find a set of these and try them out.
also looks like it has a sort of a black plate in the middle of the projector with some mounting holes, should make mounting easier. did you ask him what kind of shrouds might fit these projectors? |
Yep, those are the ones I was thinking of. They are these ones here. If you got those from Kevin, they're definitely reasonably priced for being in stock in the US, especially if he is willing to answer questions and honor some kind of warranty.
|
Originally Posted by acedeuce802
(Post 1524691)
Yep, those are the ones I was thinking of. They are these ones here. If you got those from Kevin, they're definitely reasonably priced for being in stock in the US, especially if he is willing to answer questions and honor some kind of warranty.
|
Update: these are going to be fun...
http://i63.tinypic.com/2ymvddt.jpg http://i63.tinypic.com/rji0ht.jpg Good to seal up.. Right? :giggle: http://i66.tinypic.com/280nkmp.jpg |
Oh wow
|
2 Attachment(s)
When I did my HID retrofit (Morimoto mini H1) I had to cut out part of the bowl, because there's no way the projector would fit. Apologies for ginormous pics.
Attachment 228225 Attachment 228226 These fit fine in the headlight buckets, BTW. |
Originally Posted by huesmann
(Post 1525616)
When I did my HID retrofit (Morimoto mini H1) I had to cut out part of the bowl, because there's no way the projector would fit. Apologies for ginormous pics.
These fit fine in the headlight buckets, BTW. |
As promised... Color-matched shrouds with flat black housings.
http://i63.tinypic.com/2rppwnk.jpg http://i63.tinypic.com/35kq4w3.jpg http://i67.tinypic.com/aeo849.jpg Also took the turn signals out and have a couple questions (sorry, still new to the car)... Are the vampire clamps from factory? Because the corner lights do not work on the drl, or turn signal functions. http://i66.tinypic.com/2i71z0z.jpg The 2nd owner of the vehicle went through and changed random bulbs to LED. I'm not sure what's supposed to work with what lighting function. http://i66.tinypic.com/aov1hz.jpg |
Do you have any hyperflash issues?
|
All times are GMT -4. The time now is 08:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands