NB 1.6 diferential
|
I was about to say: all 1.6 came with a smal diff, until i saw the balancer...
Meassure your housing and test it on this one... Please let me (us) know... The NA models after 93 have the small 1 piece halfshafts...but no balancer... |
asked a frend to mesure it but he didnot, my car is in his garage for some work...
this is from m.net 1.6(top) 1.8(botom) http://img113.imageshack.us/img113/5635/miatadifnd9.jpg this look more like 1.8 http://img481.imageshack.us/img481/6...diff002ed2.jpg does anyone hawe a picture of 1.8 taken lake this one? |
look at the "arms" 7" rears have much beefier arms.
I'm going to assumes since it shares the same axles as the +'96 it's a 7" rear. No reason mazda would have kept producing them as well as the 1.6L. but what those pictures are really beggin for is more of the exhaust. |
it's 7".... the pinion has that rubber damper on it.
|
exsaust is stept 70mm-60mm-50mm a local exsaust "magician" calculated it and made it...
http://img509.imageshack.us/img509/4...20618593zw.jpg http://img509.imageshack.us/img509/4...20619009ng.jpg should i keep it lika it is or go for 60mm or 70mm, turbo is T25 |
as big as you can fit.
|
:bigtu:
and for a RX7 rear end I need only 86-88 RX7 NON-TURBO differential assembly RX7 Circlips (fit onto the end of the stubs/axles, miata clips will not fit) ? |
all you need is the lsd...the end.
---- the clip i was refering to are the circlips on the end of the axles....the rx7 circlips are less outer diameter than the miata ones....the rx7 axles have a smaller ridge to accept them, and obviously the miata axles a larger/deeper ridge. use miata circlips for a miata axle and rx7 circlips for an rx7 stubshaft. https://www.miataturbo.net/braineack.../circlips1.jpg |
tnx:bigtu:
|
Holy Rusted Metal Davor!
|
and it is 2001, too much solt from the sea...
|
my exhaust is 76mm. :D
|
All times are GMT -4. The time now is 07:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands