NB cruise wiper stalk in NA?
 

I'm trying to splice in an NB cruise wiper stalk to my NA combination switch assembly and I was wondering if anyone knows if I cut the 3 wires that go into the board and splice those into a harness under the dash somewhere? Or does it tie into the NA clockspring harness?

Anyone happen to have access to the two wiring diagrams? I can't find anything that corresponds, what would it be? Dash wiring? :party:

Anyone happen to have cruise in their NA that could trace the wires coming out of the cruise stalk to see if they feed into a PCB like the NB stalk or if they go directly to a harness? Several pics I'm seeing shows the combo assembly has a main harness and a smaller 4-wire Blue/Black/Yellow/blank wire. I'm assuming this is the harness I'm looking for on the car, but would like to make sure before I start cutting things.

FYI for those who might undertake this in the future;

NA wiper/cruise combo arm has a pigtail w/ 3 wires and a 4-pin (3 used) plug that connects @ the dash with it's on harness independent of the rest of the combo switch assembly wiring.

NB wiper arm has Red/Blue, Yellow and Green/Blue wires, pretty sure these correspond with the Yellow/Blue/Black the NA used, but it's unclear which uses which at this point. Not really sure how to verify this :noob:

Edited initial post for clarification, was using clockspring incorrectly. This has nothing to do with that, just the wiper/cruise arm and wiring related directly to it. Sorry guys, been a long day :(

I've been informed that while the NB stalk does have the same 3 wire count the design for the Set/Accel function itself changed and is incompatible. :rofl: I'm bummed to think how much time I spent looking into this before I posted this thread. Mods can delete if they please. :giggle:

Edit- this about sums up my reaction: