Need Thread Size
While putting in LSD and axles, found that one of the axles had been pounded a little much and expanded the threads, making the axle nut too tight.
I need the thread size so that I can go out to try to buy a metric die to cut the threads down to where they belong. Anybody?:sadwavey: |
IIRC the different axels from different years had different nuts... I believe the 1.8's were bigger....
You might want to check with the dealer.... just to be safe... maybe Randy's site will have the info? www.solomiata.com I seem to remember when one of the 1.8 swaps done around here, the guys had to get new castle nuts.... Dave, |
You are supposed to use new nuts. One of the 1.8's is fine(spins right on), the other is too tight.
|
bruce you could get another axle nut and cut notches out of it to make it like a die, if it works it will probably be cheaper too
|
Originally Posted by Mach929
(Post 49458)
bruce you could get another axle nut and cut notches out of it to make it like a die, if it works it will probably be cheaper too
|
A friend had a die, and the size is 20mm x 1.5
|
wow i'm surprised someone had that, that's huge and odd
|
I used a Honda d-series axle nut on mine just the other night... during the swap we realized the axle size was different and only one axle came with a nut....
32mm honda D-series axle nut saved the day... thank goodness my buddies and I hoard our nuts/bolts :p Its funny how sizes can be so common... so randomly |
All times are GMT -4. The time now is 09:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands