New clutch
 

Anyone have a good source for an ACT clutch?

How much spinning will a stock clutch take!

prostreetonline.com

Silverhair, welcome to the forum. Please view this short video to help you out in the future.
http://www.albinoblacksheep.com/flash/posting.php

www.carolinaclutch.com are good guys. They had free shipping but since I live right down the road I bought everything from them :)

hey, does anyone know if you can put a turbo in a miata?

I heard only the factory rotary engined Miatas can be turbo'd.

That's right, but the head gasket will fail with over 20psi.

I have bought clutches on ebay with good luck, but they were really cheap oems for crap cars.
94+ or use with a 1.8 flywheel
http://cgi.ebay.com/ebaymotors/ACT-C...QQcmdZViewItem

Thanks for the suggestions, .....for the vendors anyway! I had found one in another thread, but not the other.

Has anyone tried the HD plate with springs and one with 6 pucks? What is the difference at 6-12psi?


I heard you could only use a turbo which spins anti-clockwise:)

an ACT HD 6 or 4 puck clutch will hold a bit more TQ than the street disc, however they aren't as fun to engage in stop & go traffic.

I am already battling idle droop in stop go traffic, so dont need anymore hastle there. Better go with the springs I quess.

I have a stock ecu with a voodoo box. It idles well if I bring the rpms down slowly, like on overrun, but if I suprise it, it goes rich and sticks at 500 rpm.

the Idle drop is not normal, have you tweaked the voodoo leaner at least it is hitting 500 rpm and not dying i think of idle droop as dieing and not just low RPm idle. ;)