New rerout adapter...
 

Found this on facebook.

https://www.facebook.com/speedworksg...type=1&fref=nf

Heater outlet and sensor bung on wrong side of thermostat.

Unless you used a remote thermostat like a M-tuned setup.

Wonder how this one deals with this closeness (regardless of where you place the thermostat).
Attachment 233454

Dual post

It would be the same, he uses a kia neck just like in the pic...

well assuming the spacer is there lol. But you would only NEED a blank spacer

According the the facebook post it needs a spacer and an inline thermostat. Not really helpful when skou's spacer is so easy to use.

It only needs the spacer for the 1.8 motors, yet another cheapo part that really only works properly on the 1.6 cars.

The heater core being in the wrong side us actually the biggest issue.

Looks like its on the drivers side to me, seems fine.

Oops. Forgot it was for a remote thermostat setup.

This does not excite me

1.6's don't even need an adapter really, no remote thermostat, just parts you take off the car and reverse.

This thing is about a lot of useless.

It's ordinary for me.