Recommend me a sandwich plate (off topice to gauges)
#1
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
Recommend me a sandwich plate (off topice to gauges)
want to get a sandwich plate that will replace my oem oil to water cooler once i get the fm thermostat cooler.
if you don't know the fm is designed to use the stock cooler as a spacer or you have to buy a spacer from them/have one made. was going to use a sandwich plate as the spacer so i could run my oil presser and temp gauge senders off of it.
if you don't know the fm is designed to use the stock cooler as a spacer or you have to buy a spacer from them/have one made. was going to use a sandwich plate as the spacer so i could run my oil presser and temp gauge senders off of it.
Last edited by jeff_man; 07-15-2010 at 11:26 AM.
#3
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
Yeah, when you buy the 1.6 model of their thermostat plate, you get an aluminum spacer that is dimensionally identical to the 1.8 oil-water exchanger. (They also send a 1.8-length threaded tube.)
So just ask 'em for that spacer.
Or, you could always leave the stock cooler in place. If you DD this car, it's nice to have it there as a preheater.
So just ask 'em for that spacer.
Or, you could always leave the stock cooler in place. If you DD this car, it's nice to have it there as a preheater.
#7
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
you where to busy playing forza 3 and petting you cat. i need somewhere to hook up my temp and op. instead of the space you got from fm or the oem cooler i was going to use the sandwich plate that wags has on his car but they are no no longer on egay when he looked last night. so i have to find one.
#8
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Put the sensor probe in the pan or get a #10 union with a port in it. Their out there, and I think LRE in Irving has them.
You may also be about to double stack plates on top of the stock cooler.
You may also be about to double stack plates on top of the stock cooler.
#14
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Yes, and let the oil drain out the hole. There is a screen on the pump neck and a filter to keep metal out. Be a man. Buy omori gauges too...or buy my orange greddy oil temp gauge so I can replace it with an omori.
#16
The deja vu in this thread is strong.
https://www.miataturbo.net/general-miata-chat-9/recomend-1-3-4-water-temp-gague-47783/
C
https://www.miataturbo.net/general-miata-chat-9/recomend-1-3-4-water-temp-gague-47783/
C