My car eats tools.
#1
Elite Member
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Location: Marietta, GA
Posts: 2,195
Total Cats: 1
My car eats tools.
This is the third socket this month. Not to mention the screwdriver a few weeks ago. This is beginning to irritate me.
Today, it was my 10mm deep socket, attached to a ¼" extension. It fell off the ratchet and slipped between my turbo and the shelf. It fell out of site just as I was going to grab it. No noise from hitting anywhere; just disappeared into the abyss. I tried shaking the car. Nothing. I tried the "drive three feet and slam on the brakes" to dislodge it. Nothing. Drove around the block trying to get it to drop. Nothing.
My car is possessed and likes to eat metal. What the ****.
Today, it was my 10mm deep socket, attached to a ¼" extension. It fell off the ratchet and slipped between my turbo and the shelf. It fell out of site just as I was going to grab it. No noise from hitting anywhere; just disappeared into the abyss. I tried shaking the car. Nothing. I tried the "drive three feet and slam on the brakes" to dislodge it. Nothing. Drove around the block trying to get it to drop. Nothing.
My car is possessed and likes to eat metal. What the ****.
#8
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,020
Total Cats: 6,588
Not a tool per se...
A few weeks ago I decided to finally clear out the drain tubes for the top rain rail. In particular, the left side one just didn't drain at all, but as infrequently as it rains here I'd never bothered.
After considerable frustration involving compressed air and such, I finally snaked a straightened-out coat hanger through the tube, from underneath the car, roto-rooter style. There were two bolts and an acorn in that damn tube, above which was piled a ton of little ****.
What gets me is- we don't have oak trees around here.
A few weeks ago I decided to finally clear out the drain tubes for the top rain rail. In particular, the left side one just didn't drain at all, but as infrequently as it rains here I'd never bothered.
After considerable frustration involving compressed air and such, I finally snaked a straightened-out coat hanger through the tube, from underneath the car, roto-rooter style. There were two bolts and an acorn in that damn tube, above which was piled a ton of little ****.
What gets me is- we don't have oak trees around here.
#12
Elite Member
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
And Deborah doesn't tell you afterwards: "you just don't know how to look for things" because mine has been doing that for too many years now. The worst thing is she is right!
#13
My wiper arm linkage ate a pair of vice grips one time that I had sitting up on the cowl and forgot about. The wipers stopped working one day, I figured the motor went bad because I had 12v at the connector. I spent $40 at the JY for a new motor, only to find the pliers wedged in there when I pulled the motor out....
cant believe I just admitted that.
cant believe I just admitted that.
#15
yeah i have to tighten my belts alot due to the squeaking, using a wrench to loosen the lower bolt on the alternator before adjusting it with the tensioner, well once i forgot to take said wrench off and heard it bouncing between my car and the road on a test ride, that and the wiper space eats my 10mm wrenches
#17
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,892
Total Cats: 399
Been there before. Unfortunately they're mostly my dad's tools, which ain't good. But I've also gotten a few tools from new (used) cars when I fix oil leaks, etc. Still pisses me off though.
#19
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
Not a tool per se...
A few weeks ago I decided to finally clear out the drain tubes for the top rain rail. In particular, the left side one just didn't drain at all, but as infrequently as it rains here I'd never bothered.
After considerable frustration involving compressed air and such, I finally snaked a straightened-out coat hanger through the tube, from underneath the car, roto-rooter style. There were two bolts and an acorn in that damn tube, above which was piled a ton of little ****.
What gets me is- we don't have oak trees around here.
A few weeks ago I decided to finally clear out the drain tubes for the top rain rail. In particular, the left side one just didn't drain at all, but as infrequently as it rains here I'd never bothered.
After considerable frustration involving compressed air and such, I finally snaked a straightened-out coat hanger through the tube, from underneath the car, roto-rooter style. There were two bolts and an acorn in that damn tube, above which was piled a ton of little ****.
What gets me is- we don't have oak trees around here.
Thread
Thread Starter
Forum
Replies
Last Post
Jike Spingleton
Cars for sale/trade
3
09-20-2016 04:33 PM
BlackBandit
Local Meets, Events and Tech Days
5
09-18-2015 09:10 AM