Al Hounos

So I've got my LSD ready and a miata diff to put it in. The miata diff is adjusted and set up well already, so I was wondering, if I mark all over with a paint pen the bearing caps and adjustment screws, would there be any reason I can't swap the LSD in and line it back up and not worry about getting it re-adjusted?

olderguy

iTrader: (19)

I would say that if you pulled the bearings, replaced the open diff with the torsen on the same ring gear and reassembled in the same location, you should be golden.

Al Hounos

That's just what I wanted to hear. Thanks.

m2cupcar

iTrader: (5)

even so I would check it- just to be sure. Why not?

dc2696

iTrader: (2)

I'd deffinately recheck it man, lsds ain't cheap and whats it cost to be safe over sorry? a couple bucks well worth it imo.

Al Hounos

Ok, I'll do the paint test to check the teeth contact when I put it together. I don't have any of those fancy micrometers and dial gauges and stuff though.