jeff_man

iTrader: (7)

Running MS2 and building an Exocet

Can I just pull and plug the holes for all the parts I marked or are they still used with a standalone for anything???




fuel line system is replaced with the below. No evap, charcoal, ext.

jeff_man

iTrader: (7)

ZX-Tex called and hooked me up

thirdgen

iTrader: (26)

Interesting thread. I'm running full standalone on my 99 and I'd like to clean up my engine bay/ remove anything that's unnecessary.

SteadFast

Also interested for my exocet. I've removed everything, and still have the sensors hooked up. Still running the OEM ECU and from time to time get a P0300 code (random misfire). Car runs perfect, no issues. (never got the code before removing the evap system) I have replaced everything that would be the issue. Then came across this thread where Keith talks about a missing canister would cause a P0300:

https://grassrootsmotorsports.com/fo...e/24409/page1/

TorqueZombie

iTrader: (6)

Where did you get the pushlock -AN stuff?

jeff_man

iTrader: (7)

The amount of people building Exocets will all stock/oem parts is still astounding to me.


Came with Exocet race kit. They are cool imo.

Chooofoojoo

iTrader: (7)

Link to the push-on to AN-6 adapters.

http://www.summitracing.com/parts/rus-644113/overview/

Earls and Russell make them. I believe Russell being the preferred as it uses a solid threaded attachment vs Earls using the plastic-clip still. 99% sure the Miata is 5/16" fuel hard-line. Double-check that before ordering.

Leafy

iTrader: (1)

Did you ever toss the parts you took off on a scale?

jeff_man

iTrader: (7)

Funny you should ask, there are the only parts I put on a the scale. 0.8lb but who knows what the whole evap system weigh.

jeff_man

iTrader: (7)

Exomotive - US Manufacturer of Exocars & Kit Cars | Exocet Stainless Steel Fuel Line Kit

miata2fast

iTrader: (2)

You are obviously spamming.

jeff_man

iTrader: (7)

He has spammed 2 of my post now. Time to ban.



Fuel rail to tank. Nothing in between.

thirdgen

iTrader: (26)

This is how it should be, but I swear I read that the crap mounted on the passengers side wheel well in a 99-00 serves a purpose for more than just nonsense emissions. Can somebody please shed light on that?

DNMakinson

iTrader: (3)

It is a damper. There is another one one the end of the rail. You can see the rail mounted one in Jeff's pic. They are there to keep down pressure fluctuations in the rail, which can be unpredictable and oscilatory pressure waves.

Vlad pulled the one from his wheel well and left the one on his rail. This was for the 2001, I believe. He saw no adverse effects.

The use of the dampers was part of at least one of the patents filed when the returnless systems were developed.