cardriverx

iTrader: (12)

A guy I know has one, I have no clue what to offer him, 100 shipped sound good or is that too much?

Braineack

iTrader: (62)

I paid $225 shipped for mine.

reddroptop

iTrader: (4)

I paid close to that for mine, but it was freshly rebuilt.

trito

iTrader: (1)

225 is a damn good price, the cost to rebuild mine was 180 alone...

karter74

iTrader: (4)

I bought 2 complete RX-7 LSD rear ends for $75 each.......

Arkmage

iTrader: (3)

paid $150 shipped for mine in fair condition... it's a little worn, but in spec.

Braineack

iTrader: (62)

my junx has like 180 ft lbs of preload on it....

akaryrye

iTrader: (5)

100 +shipping here

cardriverx

iTrader: (12)

sweet, thanks for the replys guys.

The guy said it has alittle over 100k miles, used redline oil all its life, and works good. He said hell take 100 shipped so Im makeing out good I guess!

Also, how can I tell if it needs new clutches? how exactly do you measure it? try rotateing each end in opposite directions?

Braineack

iTrader: (62)

Pull and Pry method here....set the backlash and installed it.

once installed, kept one wheel on the ground and a torque wrench on the axle nut on the one in the air....added "torque" until i could slip the discs.

iirc, factory is 60-80lbs. cant remember.

thesnowboarder

iTrader: (15)

I thought anything past 110 was kinda drift-o madness, how is yours at 180?

Braineack

iTrader: (62)

its pretty much locked all the time. only time actually notice it is in reverse. I have no issues driving in the rain or around corners....I quite enjoy traction.

cardriverx

iTrader: (12)

Where can you get the rebuild stuff and what do I usually need?

And how do I tighten it up?

cjernigan

iTrader: (13)

Mazdatrix has the plates and other rebuild pieces to re shim it.

cardriverx

iTrader: (12)

Holy crap thats like $500.. forget that. If I just get 2 oversized thrust washers what kind of clamping force range would I be seeing?