Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   General Miata Chat (https://www.miataturbo.net/general-miata-chat-9/)
-   -   Stumped - 2nd Gear Low Engagement (Other Gears are Fine) (https://www.miataturbo.net/general-miata-chat-9/stumped-2nd-gear-low-engagement-other-gears-fine-20757/)

kenzo42 05-10-2008 12:05 AM

Stumped - 2nd Gear Low Engagement (Other Gears are Fine)
 
Posted this on m.net.

So only my second gear sometimes has a super low engagement point. All other gears engage fine. I also hear a clunk when I shift to 2nd gear, if at WOT or a high RPM shift.

Slave has been changed. No leaks.
Bled about 9 times now. No differences.
All new redline fluid in tranny and diff.

Any ideas? Can't understand why it's only isolated to 2nd gear, and occurs occasionally.

*Edit* I often can't get into reverse ONLY when parked on a slight decline. Goes in fine w/ the car not started, though.

Thanks.

Mach929 05-10-2008 01:45 PM

make sure your clutch slave is 100%

kenzo42 05-10-2008 03:23 PM

There are absolutely no leaks around the slave. Any other way to check if it's ok?

Bryan858 05-15-2008 01:39 AM

May be a syncro going bad. I'm not 100% sure but I would lean towards that. Check around local tanny shops and try and find one that gives free estimates. They have loads of experience and can usually tell just by driving the car.

kenzo42 05-15-2008 03:55 AM

Why would you lean towards a bad syncro? Syncros will affect engagement point?

kenzo42 05-27-2008 03:06 AM

Anyone have an answer to this ^?

wes65 05-27-2008 09:29 AM

I would say probably synchro also, but im not a tranny expert.

ChairFaceChippendale 05-27-2008 10:32 AM

if i had to guess i'd say an internal problem too, but i wouldn't say 100%. it's kind of the only thing that makes sense since it's only happening in one gear.

messiahx 05-27-2008 01:26 PM

I don't know how your engagement point would be affected by a tranny issue, but as far as reverse, I'm pretty sure that reverse gear doesn't have a synchro so if you're rolling backwards you wouldn't be able to get it in gear without some double-clutching and rev matching.


All times are GMT -4. The time now is 07:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands