Water temperature sensor.
Thread Starter
Junior Member
Joined: Dec 2023
Posts: 94
Total Cats: -1
Water temperature sensor.
hello all,
how to wire a 05 water temp sensor onto a 1990?
2005 plug for temp sensor not sure which wire goes to the ecu. I am assuming it is an all in one connector not like the 1990 that has sensor for the ecu and another for the cluster.
1990 harness, not a 100% sure where the wires go. I have narrowed down the ECU wires.
how to wire a 05 water temp sensor onto a 1990?
2005 plug for temp sensor not sure which wire goes to the ecu. I am assuming it is an all in one connector not like the 1990 that has sensor for the ecu and another for the cluster.
1990 harness, not a 100% sure where the wires go. I have narrowed down the ECU wires.
Last edited by Sezgin; Apr 20, 2024 at 06:36 PM. Reason: Add pics
Reply
0
0
Junior Member
Joined: Jul 2022
Posts: 164
Total Cats: 20
On the NB stuff its a ground and 2 signal wires as the sensor has dual elements. One goes to ECU and one goes to gauge cluster...
Doubt it matters which goes to which as I believe they are both 5v reference.
Doubt it matters which goes to which as I believe they are both 5v reference.
Reply
0
0
Nope, they’re a resistance sensor. I guess maybe they’re a 5v pullup?
anyways, ecu temp is red/blk and red/blue. The red/black is sensor gnd at ECU, violet/white is cluster signal.
anyways, ecu temp is red/blk and red/blue. The red/black is sensor gnd at ECU, violet/white is cluster signal.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
mopnbucket
ECUs and Tuning
4
Jun 29, 2021 12:24 AM
