General Miata Chat A place to talk about anything Miata

Fluctuating oil pressure after oil change with Rotella Syn.

Thread Tools
 
Search this Thread
 
Old 06-14-2009, 01:52 AM
  #1  
Junior Member
Thread Starter
iTrader: (4)
 
redrider706's Avatar
 
Join Date: May 2009
Location: Athens GA
Posts: 440
Total Cats: 6
Default Fluctuating oil pressure after oil change with Rotella Syn.

I just did a oil change on my miata a few days back. Its a 91 with a 1.8 swap and a turbo. I used Rotella syn. 5w40 oil and a Purolator PL14610 filter (just a little longer than the PL14612). Today I was driving the car at ~60mph and I noticed that the oil pressure was fluctuating a little (~5psi) at constant rpm. Some where I read that the rotella has more dtergents and will clean the engine on first use. Could this be the reason its fluctuating, with all the crap floating around? I just bought the car and the previous owner said he used Mobile 1.

I am worried and wondering if I am damaging the engine. Any pointers?

Thanks.
-Raj
redrider706 is offline  
Old 06-14-2009, 03:06 AM
  #2  
Junior Member
iTrader: (5)
 
dima88's Avatar
 
Join Date: Aug 2008
Location: Northbrook IL
Posts: 105
Total Cats: 0
Default

I have a 1.8l and mine fluctuates +- 5psi but only at idle, i use mobile 1.
dima88 is offline  
Old 06-14-2009, 09:30 AM
  #3  
Tour de Franzia
iTrader: (6)
 
hustler's Avatar
 
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Default

how is your oil pressure sensor mounted? If its not pointing "down" then you could have air in the sensor.
hustler is offline  
Old 06-14-2009, 05:55 PM
  #4  
Junior Member
Thread Starter
iTrader: (4)
 
redrider706's Avatar
 
Join Date: May 2009
Location: Athens GA
Posts: 440
Total Cats: 6
Default

It is mounted horizontally. I will check the connections tomorrow.


Thanks guys.
-Raj
redrider706 is offline  
Old 06-14-2009, 06:34 PM
  #5  
Junior Member
 
04 Miata's Avatar
 
Join Date: Mar 2008
Location: Charleston, S.C.
Posts: 159
Total Cats: 0
Default

Are you using the OEM OPG and sender?? If so a few things could be happening. First if you have knock the OEM sensor reacts to it as varying readings. The second thing is if the connector on the sender is dirty it causes strange readings. I've fixed many a "I have an oil pressure issue" by cleaning the tab on the sender with some emery cloth and spraying some tuner cleaner into the connector on the wire.
04 Miata is offline  
Old 06-14-2009, 08:06 PM
  #6  
Junior Member
Thread Starter
iTrader: (4)
 
redrider706's Avatar
 
Join Date: May 2009
Location: Athens GA
Posts: 440
Total Cats: 6
Default

Originally Posted by 04 Miata
Are you using the OEM OPG and sender?? If so a few things could be happening. First if you have knock the OEM sensor reacts to it as varying readings. The second thing is if the connector on the sender is dirty it causes strange readings. I've fixed many a "I have an oil pressure issue" by cleaning the tab on the sender with some emery cloth and spraying some tuner cleaner into the connector on the wire.
Yes, I am using the OEM OPG and sender. I have been driving the car for a few weeks now at about the same condition and did not notice any fluctuation before the oil change. I did try to remove the connector to the sender unit to move it out of the way when trying to remove the oil filter. I couldn't get it off, but I might have loosened it a bit. I will check it tomorrow.

Thanks.
redrider706 is offline  
Old 06-15-2009, 03:27 AM
  #7  
I'm Miserable!
iTrader: (16)
 
zoomin's Avatar
 
Join Date: Dec 2008
Location: where most people are Utarded
Posts: 1,296
Total Cats: 0
Default

Yeah, check the connector as been said. Also, how many miles since the oil change? I started using the Rotella in my Jeep a few months ago and changed only the filter after about 1500 miles because of the gunk that cleaned out of the engine and stuck in the filter. I'll do a complete oil change in it after another 2k miles or so. I also plan to start using Rotella in the Miata as well with the next oil change.
zoomin is offline  
Old 06-15-2009, 11:54 AM
  #8  
Junior Member
Thread Starter
iTrader: (4)
 
redrider706's Avatar
 
Join Date: May 2009
Location: Athens GA
Posts: 440
Total Cats: 6
Default

I have only driven about 100 miles since the oil change. Will check/clean the connector this evening.

Thanks.
redrider706 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
Aroundcorner
Miata parts for sale/trade
2
10-01-2015 03:20 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM



Quick Reply: Fluctuating oil pressure after oil change with Rotella Syn.



All times are GMT -4. The time now is 05:04 PM.