ENTHUZA exhaust Group Buy - ENDS 4/30
 

OK guys - Here's what Jason at Enthuza can offer us:

We only need 3 sales to qualify for a Group Buy.

3" aluminized turbo racer with a magnaflow muffler for $330 + shipping.
As above in stainless $400 + shipping.

2.5" systems are also available at a similar saving.

The included tip will be a section of exhaust pipe welded onto the muffler. Upgrades are available.

Cats or test pipes are also available for almost any downpipe or engine combination to fit the exhaust. Jason will quote those prices on an individual basis.

I asked him about adding a resonator, and he's not sure if one will fit without hitting the subframe or PPF bracing, so he's going to check into it. If it's ok, the upcharge will be $65.

Jason asks that if you're interested, please call him. He'd rather spend a few minutes on the phone with you, spec'ing out what's best for you, than going back and forth via email for 3 days. His phone number is 404-310-3302.

If you do call him and decide to buy a system, please post something here, so I know you're in.

End date: In order to make this work for Jason, he's going to build all the exhaust at one time once the orders are in, so I'm thinking 2 to 3 weeks max.

C

1. Arkmage
2. Left Field
3. Vashthestampede
4. Alekzs
5. modernbeat

Count me in. Ill give jason a call sometime this week.

I should be in. I need to give Jason a call tommorow to talk to him. Not sure of if I will go with a 2.5inch or a 3inch exhasut. I also need this sooner then may. Scott might kill me if it takes forever to get a steady state dyno.

he'll do you a dual system....just a tad extra dinero.

I'm game for it. the sooner the better

Im in for a 3" SS =P

Any audio clips?

Sounds like a good system, but I won't make the deadline.

Wait, I found a clip...

http://youtube.com/watch?v=DdSg0E8z8Fk

Sounds good!

dont forget my clips:










3" with magnaflow muffler.

Guys, please remember to let me know once you decide you're definitely in, and I'll post your name to the list.

C

i'll be in once jason answers his phone :( definitely getting the cat back, will probably get a 3" cat pipe as well.

Sorry about the missed calls yesterday. I was in a big metal building all day
which killed the phone reception. BEGi's sale was for complete exhaust system. This would include a Cat and exhaust on the NA models or a midpipe and rear exhaust section on the NB car. I will offer the 15% discount on cats, testpipes, or any turbo exhaust for the NB cars. Thanks, Jason

3" will easily support 350 whp.

chriscar: i just ordered my exhaust and muffler and paid. ETA is two weeks + shipping

Fat trimmed. Let's keep this on point.

EASILY Done.... talked to Chris today. Set the ball in motion. IM in on the deal.

Cool beans. What specifically did you guys order, (year Miata, single/dual, exhaust diameter, resonator, cat, test pipe, exhaust tip, etc.) and prices if you don't mind, which will make it easier on others, and cut down on questions to Jason.

1. Arkmage
2. Jedduh01
3. Left Field

C

So whats the final price for a dual 3" with resonator shipped to cali?

If you need something other than what we have listed on the first post, please call Jason. It's impossible to list every combination, so I'm not even going to try. Talk to him, decide what you want vs. what you can afford, and you'll get your system at the group buy discount which is approximately 15%.

C

3" Aluminized Budget Racer W/ Magnaflow - $330
3" Ceramic Core High Flow Cat Pipe - $15X (can't remember exactly)
Shipping to Houston,TX - $30 (about half of what I expected)

Total came out to $51X

X = wildcard because I don't remember exactly.

I was thinking that the cat pipe was too expensive until I thought about it. I've found 3" high flow cats as low as $80 +$10/flange = $100 minimum + extra 3" pipe + my time + my hassle

Thanks to Chris and Jason for setting this up. I'm looking forward to rocking my new BEGi downpipe and enthuza exhaust when I get back from offshore early June.

*edit* PS: Jason: If you read this include a sticker and I'll advertise a bit for ya. Now that my car is fast enough to outrun people when they start laughing I don't mind ricing it out a bit with stickers.

talked to jason at enthuza today:hustler:. i'm officially part of the group buy, so add me to the list;).

edit.

basic aluminumized 2.75in without out fancy tip. haven't decided yet but may get a test pipe as well.