Hydra 2.7 EBC Finally Working and Tuning info
 

Im hoping the guys here may have more to add on the pid tuning given all the ms success using it.

I have it in and working and now I want to perfect it and the trims that go along with it. Here is how I did it Hydra 2.7 EBC Settings. Brainstorming, thoughts and help

PID advice? Gear Trim thoughts? :brain: take over the world?

If I was running 15psi like normal, I would cut it down to 8 in 1st to make sure you get traction. After that 12psi in 2nd and 15 in 3rd onward maybe?

I've wanted to dyno my car at 15psi, then bump my boost another PSI when the hp/tq start to fall off. Just a matter of the EBC working like it should.

Yea i still get traction in first and second but only with my good RS3's. 4-6 it seems to overboost by about a psi so ill probably make those gear trims negative once the vss is setup.