|
Almost Ready For My Greddy :DDDD
1 Attachment(s)
Yaaay!
I just got my pan tapped and my IC mounted and all the necessary holes cut for the piping! Attachment 215667 Im gonna probably start bolting on the manifold and stuff monday or tuesday hopefully. Wish me luck!!!! I cant wait because im gonna be running kind of a different set up then my last car. This time im gonna have this IC, the better piping (some say its the begi kit) supra injectors, 02 clamp, HP fuel pump im anxious... Hehe. Thanks for looking, ill keep you guys updated (not that you care) |
cut what holes?
|
The passenger side whole for the IC piping, and the Driver side whole for the IC piping.
Its recquired in this kit |
That's interesting. I'm running a modified version of the Stripes kit and i didn't have to cut any holes. you're cutting into the radiator support or something?
|
Nope. Ill take pics of i though as soon as i can for ya
|
you cut a whole what? Family of 4 up into little pieces?
|
Wooww.
Wel today I did everything on my car but when it got to ic piping, the pos didnt fit. So cut weld, cut weld cut weld, hot side doesnt want to fit too well.... so gotta go ack again tomorrow morning to figure that bitch out : / |
1 Attachment(s)
|
So when you gonna start your turbo install??:bigtu:
Lookin good to me. |
Its all on.
Just have to figure out what we are gonna do with the driver side IC piping.... Any suggestions? right now, we cut a whole in the fenderwell and it goes trhough there. |
Well, if it were me, I would order all the right alluminum bends and weld them up. I really don't have any experience with installing IC's but I know you don't want your pipes too low and risk them ever hitting the ground. I probably sound retarded as I've never done this before.
This will probably sound stupid too, but I'm doing some research on building a intercooler setup. I'm considering making pipe that goes my SC to the intercooler cooper, as conducts heat 70% better than Al. If may even make an intercooler. I need to source some 2" copper tubing. It's expensive new, but I'm going to check around and see what I can find. Right, you said suggestions... Wouldn't it be better to clock that turbo pointing down as that would move that pipe away from the fender and minimize the length of the pipe to reach the intercooler? That may not be practical and again I'm no turbo guy. All I know is it's something to do with snails that get hot and make air move. |
it looks good. good luck. why did you get another miata tho what was wrong with the grey or silver one
|
Originally Posted by mike_671
(Post 163865)
it looks good. good luck. why did you get another miata tho what was wrong with the grey or silver one
Trust me. Falling apart, and a big ass dent in the quarter panel |
oh ok haha, did you even transfer your motor to or keep the one that was in your white miata
|
is that a godspeed intercooler? my IC piping was a B***h to put in...so i took it to a muffler shop in Elk Grove and they just ran it through the two holes in the front on radiator support...pretty cool..250 bucks.. its not crush bend...check it out on youtube...type in miata turbo-yoshimura muffler...
|
Originally Posted by mike_671
(Post 164210)
oh ok haha, did you even transfer your motor to or keep the one that was in your white miata
|
Originally Posted by Eunos_roadsterna6ce
(Post 164213)
is that a godspeed intercooler? my IC piping was a B***h to put in...so i took it to a muffler shop in Elk Grove and they just ran it through the two holes in the front on radiator support...pretty cool..250 bucks.. its not crush bend...check it out on youtube...type in miata turbo-yoshimura muffler...
Ill take pics of mine soon for other people |
1 Attachment(s)
|
wow...that piping is NICE!!! did you do that yourself?
|
Had some help from a buddy of mine Phil.
Its interesting huh? Doesnt rub on NOTHING! |
| All times are GMT -4. The time now is 09:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands