apparently DIY ic of MT people are junks
This guy is trying to sell his ic setup just pipings + bov on CR and here and i replied on CR saying you could find actual whole plug and play intercooler setup wiith bov for under his asking price on here and he got butt hurt
Originally Posted by GT42R
I don't know what kind of junkyard DIY intercooler setup you refer to, but the 47mm Greddy Type R bov I am including can sell for $200 itself. You're getting a bunch of free piping and couplers on top of that. This setup supported well over 500rwhp, so take that as it is.
If you can buy a "whole intercooler setup" , with intercooler, bov and piping for $200 or less, I strongly encourage you to do so. I think I've broken down the value of this setup clearly in my first post, and the asking price is fair imo. not to be an asshat but meh. couple of IC pipes that will support zomg 500rwhp 200 for http://www.pictrace.com/i/intercoolerpipingfresh.jpg http://www.pictrace.com/i/intercoolerpipingfresh2.jpg |
:inout:
|
:bowrofl:
and here I just sold my over the rad intercooler setup WITH core and with a high flow fan and every bracket/pipe required for 200 shipped. |
Originally Posted by 18psi
(Post 561191)
:bowrofl:
and here I just sold my over the rad intercooler setup WITH core and with a high flow fan and every bracket/pipe required for 200 shipped. |
OH FOR SURE, they're only good to 499:giggle:
|
is that aluminized steel?
|
cast aluminum..........
|
first off i wonder where he got a 3.5 inch tb and second i still wonder at people straping huge heat exchangers infront of there rads.
|
Originally Posted by WonTon
(Post 561200)
cast aluminum..........
|
Originally Posted by magnamx-5
(Post 561201)
first off i wonder where he got a 3.5 inch tb and second i still wonder at people straping huge heat exchangers infront of there rads.
https://www.miataturbo.net/miata-parts-sale-trade-5/intercooler-pipe-kit-greddy-type-r-bov-46569/ |
I thought that screen name was familiar.
When I first saw the coldside I was like what the hell, that looks like it for a FWD. But he twisted the last elbow so it would be flat on the floor. |
Originally Posted by magnamx-5
(Post 561201)
first off i wonder where he got a 3.5 inch tb and second i still wonder at people straping huge heat exchangers infront of there rads.
|
I was thinking the same thing about the 3.5" TB
|
Q45 throttle body... Interesting.
|
$200 for a GReddy Type-R??? WTF is he smoking? I got a GReddy Type-R off here and a GReddy Type-S locally. Combined price for both was less than $150...
Did you say 500WHP!? O.o |
Originally Posted by thagr81 us
(Post 561245)
$200 for a GReddy Type-R??? WTF is he smoking? I got a GReddy Type-R off here and a GReddy Type-S locally. Combined price for both was less than $150...
Did you say 500WHP!? O.o otherwise all his piping is junk. |
Neo actually sold his Type-R to me... I didn't quite pay $150. But close. I basically stole the Type-S from the local guy. He was kind of a dumbass to say the least. Haha!
|
The cast elbows are surprisingly expensive new. but the silicone elbows are not.
|
CR thread is closed. :D Nothing like some banning in the morning.
|
Originally Posted by revlimiter
(Post 561372)
CR thread is closed. :D Nothing like some banning in the morning.
Im surprised no one has said anything here, the guy has only 12 posts or so. |
All times are GMT -4. The time now is 10:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands