|
Do you still need a giant washer?I have some 4140 setting next to the lathe right now,Just PM me dimensions,and It is Yorn....
(G) |
Yeah, thanks Greg. Can't get exact dim's right now since the parts are at a machine shop. I'll let you know in a few days. :)
|
No problem,Ive got a variety of materials,316 SS,Al Bronze,4140, 7075 Aluminum...
Just let me Know (G) |
Originally Posted by JKav
(Post 563112)
From your pics, this is pretty much what happened to all Vishnu adapters -- the bolt heads abrade the soft aluminum, which takes the preload out of the four little bolts. They then loosen and eventually snap.
Larger bolt underhead area (replace tiny allenhead bolts with integral washer hex head) and a steel backing (NA washer ring, in my case) fixed it for me. No need to mess with larger dia bolts and such, in my case... I'm now up and running again, with 8x20mm hardware. The next jump up was 8x25mm, so after Rev Greg cuts me a washer-ring, that's what I'll run. |
Im available to measure your parts to get the exact Numbers,let me know so we can meet up.
(G) |
Thanks Greg--but I can either come to you or send you a drawing and/or spare parts. I don't want to ask you to come to me for a favor. :)
|
Originally Posted by Ben
(Post 570235)
Thanks Greg--but I can either come to you or send you a drawing and/or spare parts. I don't want to ask you to come to me for a favor. :)
(G) |
| All times are GMT -4. The time now is 10:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands