So how did your car do at 10psi?
|
http://www.rev2red.com/images/cars/d...noday_plot.jpg
pretty well, I lost major power since my EBC didn't like the dyno, it would hit 9, drop to 6 and hit 9 again (look at the flat spot on the torque curve!). I made 185tq on one run but the boost dropped to 2 so i didn't make a good run. EBC worked great on the street, but overall I'm happy! I'll get it back to another dyno soona nd get better results. a/f is perfect! http://www.rev2red.com/images/cars/d...ynoday_afr.jpg |
|
a/f looks really good. That's strange that your boost controller dropped your boost to 6 and then back to 9. I like how on the last three runs you made more peak torque than hp.
Car seems to be coming together well. Good job!!! |
I'm tesing an Electric Boost Controller, so it wouldn't bleed boost correctly on the dyno dunno. on the street it was perfect. I tried playing with the duty cycles, but that was about the best I could do it.
If it held at 9 this is what I would assume it to plot: http://www.rev2red.com/images/cars/d...editedplot.jpg This is about where I estimated its power. My AFR makes me really happy, all that math and talking with Corky paid off. Now I can't wait to tune it up with the BEGi, I was running the vortech on these pulls. |
Sweet!
Looks like an awesome time. Lots of bad-ass cars there too.. :bowdown: The revised plot would be perfect, lots of area under that curve, so that's what it's like off the dyno huh? Wow. Tune looks pretty freakin good. Nice work. |
Let's not forget that BRGRacer did the impossible again today.:bigtu:
|
He sure did! Can't wait till you guys post your pics and plots! Brad got a CEL on the way home and his car is stumbling now, I think he killed his pump.
So what were the results? Brad - 120hp @ 5psi problems fueling :( Bruce - 200hp(13psi at 6475rpm) 208 Torque(17.1psi@4380rpm) Tim - 210hp @ 10psi Tom - 243hp @ 15psi Phil - 160hp @ 6psi Me- 180-200hp or so @ 9psi Correct? |
Im so sad I couldnt make it :(
|
Who's twin turbo car is that? What material did you use for that heat shield?
|
Originally Posted by RusMan
(Post 46152)
Who's twin turbo car is that? What material did you use for that heat shield?
https://www.miataturbo.net/forums/sh...highlight=twin |
Whos Tom?
|
had good time nice to see meet you guys and see your cars
|
Originally Posted by magnamx-5
(Post 46163)
Whos Tom?
|
Originally Posted by braineack
(Post 46118)
So what were the results?
Brad (newbsauce)- 122hp @ 5psi problems fueling :( Bruce (olderguy) - 200hp(13psi at 6475rpm) 208 Torque(17.1psi@4380rpm) Tim (turbotim)- 210hp @ 10psi Tom (brgracer)- 243hp @ 15psi Phil (mach929)- 150hp @ 6psi Scott (braineack)- 177hp @ 9psi For a grand total of 1102hp :bigtu: I'm sure once Brad's fuel filter/pump are done, he'll be right up there as well. |
Originally Posted by RusMan
(Post 46152)
Who's twin turbo car is that? What material did you use for that heat shield?
Even though I was extremely nervous putting my car on the dyno, I had an awesome time. For whatever reason the car makes 3psi less on the dyno than on the road. :confused: Nice video, that was my first run at 9psi @ 201hp. I think Bruce and I are going to seriously consider larger intercoolers after seeing Tom's results! |
Originally Posted by braineack
(Post 46118)
He sure did! Can't wait till you guys post your pics and plots! Brad got a CEL on the way home and his car is stumbling now, I think he killed his pump.
So what were the results? Brad - 120hp @ 5psi problems fueling :( Bruce - 200hp(13psi at 6475rpm) 208 Torque(17.1psi@4380rpm) Tim - 210hp @ 10psi Tom - 243hp @ 15psi Phil - 160hp @ 6psi Me- 180-200hp or so @ 9psi Correct? |
Originally Posted by jayc72
(Post 46189)
Nicely done! How about torque numbers?
BRGracer (Tom) suggested I put a helper spring on which I just finished. I'll run a street log tomorrow to see if it changed anything. I edited the above post to show where and what. |
did you notice the AFR sniffer was about a full point off? My plot shows a flat 13:1 AFR, but my log shows a flat 12 AFR as posted above.
Don't you hate when your wastegate opens early? ;) The day was tons of fun, and it was great seeing everyone's setups. Can't wait to do it again! |
All times are GMT -4. The time now is 04:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands