How do you guys keep your garage floors from getting filthy when you're working on stuff and how do you get stains out of them? I've seen a ton of videos on youtube, but it's always someone selling **** or saying that rubbing in kitty litter magically makes stains go away...

I'm trying to lift a few spots of oil out but curious how you guys do it. If it was up to me, I'd epoxy the floor, but sadly it's not my decision to make.

 

If it's concrete, there's nothing you can do about it. Pores will absorb dirt (especially oil) and it cannot be removed. I use carboards and nylon sheets (caution; slippery!!!) to avoid getting oil stains. Almost everything else can be removed with a pressure washer, given that you are willing to move everything outside so you can actually wash it.

 

Denatured mineral spirits and more kitty litter?

 

buy 1 gallon of Rustoleum 2 part epoxy floor cover. This is the best consumer grade stuff ive ever used. Brake cleaner doesnt even faze it. Screw directions, just dump it on and roll it out. leave it super thick, it will level out.

 

Really? Don't bother with the muriatic acid wash first or anything? I really want to do this to my garage.

 

MEK

​​​​​This will get the oil up and out of the pores of the concrete. Use blue shop towels and pat at it. After that you can use a dilute muriatic acid to restore the bright color of the concrete.

 

TSP is by far the best thing for cleaning concrete, but I don't think you can buy it anymore. Do NOT try the TSP substitute, it is crap and doesn't work.

 

You can buy TSP but it's phosphate free... So it's just TS ...


Please don't SJW me. I don't know it's proper pronoun. :(

 

I just used the citrus cleaner that the gallon comes with. I was a little misleading on my instructions... I follow instructions for cleaning and prep, but not application. if you apply it like they say, it will be super thin. I did one heavy coat. mix, wait, dump, roll out. Also if you leave it way thick, it will fill most of the imperfections in the concrete.

If you roll mulitple thin light coats, it will look like you painted over 40 grit sand paper. yucky. I had 2K sq. feet to learn on.


on one section, I rented a concrete floor grinder for 50 bucks, before clean and epoxy. That area looks like an ice skating rink.

 

We can still get TSP here. I add a little sprinkle to the electric dishwasher detergent to get dishes clean since they reformulated the detergent remove phosphorus. Dishwashing detergent stopped working as well a few years ago.

If you use MEK ventilate well and don't get it on you.

 

Complete bullshit.

A few companies make a waterless concrete cleaner that will pull oil right out of the pores and break it down into something that wont absorb back into the concrete. I cant recall the brand I started using 10+ years ago when I discovered it, but a google search reveals a half dozen or so companies have recently released similar products. The **** works fuking miracles.

It takes time to work though, and really "tight" concrete with really old stains can take 2-3 applications over the course of a month or 2.


Edit- found it
http://www.rekrete.com.hk/products/
At the time they wouldn't sell to consumers, they may still not. I happened to get a hold of a guy that has a gas station route in my area and he literally just stopped by my house and gave me about a half gallon. Wouldn't even take my money. I still have half of it left and I've probably treated 150sq ft.

 

Thanks for this! Surprisingly, the house I bought last year the garage isn't too bad, but the driveway is horrific.

 

Impressive. My oil stains refuse to come off no matter what I have used. Not sure if this stuff is available over here, but there must be equivalent products.

 

Oh are you across the pond?

 

I'll start with TSP and see how it goes.

​​​​​​My house is rented and the landlord is a bit ---- when it comes to this stuff. He thinks that no car should be in the garage it's leaking oil at all, which is kind of hard to know until you see something on the ground.

I'm not sure why he didn't treat it first and epoxy it, but his logic is pretty lost on me. There are a few spots from the last 3 years living here I want to address even if it's just a little bit.

 

muratic acid works pretty well too. I think you can get it at the pool supply stores.


Funny story about TSP- I was 7 years old and needed my golf ***** to be really clean. so dump half a box of TSP in a five gallon bucket of water, a bicycle inner-tube wrapped around the handle so I could wind it up and let it spin. Instant 12 ft. Tie Dye spin art on parents dark green carpet.
Summer break was the best.

 

Muriatic will also seriously deteriorate your concrete too. I would absolutely try MEK first.

 

MEK or TSP? I can't find anything relevant when I google MEK :/. MEK turns up acetone on home depot.

The EXIMO stuff that Sean posted looks interesting too.

 

TSP is safer to use. Breathing MEK, or getting it on your skin can seriously damage your liver.

Of course you'd need to damn near bathe in the stuff, but there is a reason most industry has moved on to other solvents.

 

MEK. Pour it on, pat it dry with blue towels.

You start using acid then you start getting to the point where you can't touch anything, it needs to be neutralized before picked up. It's not easy to just wash away. Hydrochloric will work for sure, but it's not nearly as easy to work with.