How (and why) to Ramble on your goat sideways
05-15-2014, 12:17 AM
My Lenovo Thinkcentre M92p desktop has 8 USB ports. It really, really irritates me that they are layed out as follows:
4 USB 3.0 in the back
2 USB 2.0 in the back
2 USB 2.0 in the front
Seriously? The only USB 3.0 ports are in the back? This makes total sense, because I want my keyboard and mouse to be hooked up to USB 3.0, but I definitely wouldn't want an easily-accessible USB 3.0 port in the front where I could hook up my USB 3.0 portable hard drive.
4 USB 3.0 in the back
2 USB 2.0 in the back
2 USB 2.0 in the front
Seriously? The only USB 3.0 ports are in the back? This makes total sense, because I want my keyboard and mouse to be hooked up to USB 3.0, but I definitely wouldn't want an easily-accessible USB 3.0 port in the front where I could hook up my USB 3.0 portable hard drive.
Reply
0
0
05-15-2014, 10:16 AM
I bought my wife a SD card reader with USB 3.0 ports on the front. I was sad when I found out her motherboard only has the connectors on the back, no internal headers to route to the front.
Can someone explain to me VW's obsession with TTY bolts? I am refreshing the suspension on the jetta and every single fastener is listed as tty always replace. I haven't checked, but at this point I would not be surprised to find that the lug bolts and oil drain plug are TTY.
Can someone explain to me VW's obsession with TTY bolts? I am refreshing the suspension on the jetta and every single fastener is listed as tty always replace. I haven't checked, but at this point I would not be surprised to find that the lug bolts and oil drain plug are TTY.
Reply
0
0
05-15-2014, 12:16 PM
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
Can someone explain to me VW's obsession with TTY bolts? I am refreshing the suspension on the jetta and every single fastener is listed as tty always replace. I haven't checked, but at this point I would not be surprised to find that the lug bolts and oil drain plug are TTY.
Last edited by Jeffbucc; 05-15-2014 at 09:24 PM.
Reply
0
0
05-15-2014, 01:49 PM
lol too late. Grease got on the threads of the funny shaped subframe bolts and it broke when I tried to torque it down. I think it came from the inner CV joint when it failed and managed to find its way in there when I removed the bolt.
The little voice inside my head said something was wrong, but I told it to shutup because I wanted my Miata back.
The little voice inside my head said something was wrong, but I told it to shutup because I wanted my Miata back.
Reply
0
0
05-15-2014, 09:23 PM
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
Fantastic interview with Mel Brooks on my favorite movie Blazing Saddles. Thought I'd share it since I'm sure others love it too.
Mel Brooks discusses Blazing Saddles, Brooksfilms, and the best screening ever
Mel Brooks discusses Blazing Saddles, Brooksfilms, and the best screening ever
Reply
0
0
05-16-2014, 12:24 AM
Depends if the rear usb ports are hard mounted on the board or not. Some of us don't like to re-solder plugs on the board if we dont have to.
Personally i dont like using my front usb ports just because i like my usb 3.0 being on my desk so i have an extension from the rear of the computer to my desk.
Personally i dont like using my front usb ports just because i like my usb 3.0 being on my desk so i have an extension from the rear of the computer to my desk.
Reply
0
0
05-20-2014, 11:23 AM
Just got back from a trip to see family in WV. I'll listen to it today.
FWIW, I still listen to Thriller at least every other week. Been doing it for 31 years now. Had it on a cassette tape with Journey Captured (at least all the songs that would fit on one side of a 90 minute tape) on the other side. Geez I feel old...
FWIW, I still listen to Thriller at least every other week. Been doing it for 31 years now. Had it on a cassette tape with Journey Captured (at least all the songs that would fit on one side of a 90 minute tape) on the other side. Geez I feel old...
Reply
0
0
05-20-2014, 11:55 AM
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,023
Total Cats: 6,591
Smooth Criminal always takes me back to a happy place.
Trivia: did you know that Jackson actually patented the shoes used to do the signature lean in that video?
It's true. US Patent no. 5255452, "Method and means for creating anti-gravity illusion."
Trivia: did you know that Jackson actually patented the shoes used to do the signature lean in that video?
It's true. US Patent no. 5255452, "Method and means for creating anti-gravity illusion."
Reply
0
0
05-20-2014, 12:31 PM
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
in that music video/moonwalker they used wire.
on stage they used those shoes.
you can see one of the dancers almost tripping getting out of one at 3:55:
one of my regrets is not driving up the NY to see him play with J5 at maddison square gardens in the early 2000s.
on stage they used those shoes.
you can see one of the dancers almost tripping getting out of one at 3:55:
one of my regrets is not driving up the NY to see him play with J5 at maddison square gardens in the early 2000s.
Reply
0
0
05-20-2014, 02:37 PM
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
A customer ordered 20 Samsung security cameras.
We have been selling these particular cameras since they first came out about 6 months ago, out of hundreds we have sold I have had 2 or 3 come back as defective.
This guy calls and says 5 cameras are bad out of the 20 he bought.
I get them today, and start testing them. None work. No video. No IR LEDs coming on. Nothing.
I notice one is rattling like there is a loose piece inside.
That piece turns out to be an electrical component that de-soldered itself.
Im not 100% sure what it is. Its that little white ceramic cylinder with the square base. Kinda looks like a high current resistor, like maybe a heater to act as a defroster? Paging Joe Perez.
Some blown up vregs and melted traces.
The IC in the above picture (the one that is surrounded by burn marks) turned out to be the motor driver for the autofocus (BA6208L).
Im pretty sure this guy either wired a couple cameras up backwards in the power supply.
We have been selling these particular cameras since they first came out about 6 months ago, out of hundreds we have sold I have had 2 or 3 come back as defective.
This guy calls and says 5 cameras are bad out of the 20 he bought.
I get them today, and start testing them. None work. No video. No IR LEDs coming on. Nothing.
I notice one is rattling like there is a loose piece inside.
That piece turns out to be an electrical component that de-soldered itself.
Im not 100% sure what it is. Its that little white ceramic cylinder with the square base. Kinda looks like a high current resistor, like maybe a heater to act as a defroster? Paging Joe Perez.
Some blown up vregs and melted traces.
The IC in the above picture (the one that is surrounded by burn marks) turned out to be the motor driver for the autofocus (BA6208L).
Im pretty sure this guy either wired a couple cameras up backwards in the power supply.
Reply
0
0
05-20-2014, 03:25 PM
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,023
Total Cats: 6,591
That said, I'd be surprised if the camera didn't have reverse-polarity protection in the form of a diode inline with the power supply. It looks like there might be one in the second image, just below the "V1.1" sticker.
Reply
0
0
05-20-2014, 04:44 PM
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
On the other side of the board there is what appears to be a protection diode on the positive power, unharmed in the explosion and subsequent release of blue smoke.
I dont get it.
I considered that he may have accidentally used a 24V AC power supply, but the other cameras didnt blow up. So I still dont get it.
Reply
0
0
05-21-2014, 08:38 AM
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,023
Total Cats: 6,591
Basically, when an overvoltage condition occurs, it clamps and conducts from V+ to ground.
Interestingly, that specific part has a maximum working voltage of 6v, and a maximum trip voltage of 25v. If 24VAC were applied to it, that part would probably sit there tripping on and off continuously. I'm not sure where I'm going with this line of thought...
If the white cylinder is part of the video circuit (which I'm not entirely convinced of), then it's probably something mundane like an inductor. I'll bet that nothing bad at all happened to that part- rather the heat generated by the immolation taking place on the other side of the board simply melted the solder under it and caused it to drop off. That sometimes happens.
Reply
0
0
