FR-S has roll oversteer built in?
#1
FR-S has roll oversteer built in?
Willall Racing - WR310 WRX STi
The Toyota version of the 86/BRZ features a strong tendency to roll oversteer at high speed which was one of the first parts of the handling character that was to be dialed out.
#2
Elite Member
iTrader: (15)
Join Date: Jan 2007
Location: Murfreesboro,TN
Posts: 2,042
Total Cats: 265
I've read that the FR-S tends to be a little more edgy on the handing and tends to oversteer when pushed. Where the BRZ is a little more "refined" and doesn't tend to twitch on corner exit. I believe they use a slightly different spring rate in the rear is really the only difference.
#6
Elite Member
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
Originally Posted by Car and Driver
At the limit, you’ll find the key difference between the Subaru and the Scion. Go screaming into a turn or hop on the gas too early exiting one, and the Subaru simply understeers—perhaps for the benefit of drivers familiar with the brand’s all-wheel-drive products. The Scion uses softer springs and stiffer shocks, and it has a sensitivity to driver inputs that makes it feel alive. Too much or too little throttle upsets the Scion’s balance, sending the car into an easily controlled drift. Its behavior reminds us of the dearly departed first-generation Honda S2000. It’s not impossible to get the Subaru to oversteer—deliberately timed and moderated inputs will coax the tail out—it’s just not going to catch you by surprise. In either car, though, the transition from cornering to drifting is gradual, and the low curb weight—about 2800 pounds—helps make it easy to rein in a slide before you tailwhip your neighbor’s mailbox.
#7
"Roll oversteer" is different than static balance from springs/sways. Transient behavior from the shock tuning is different still.
Roll oversteer is a geometry thing. From the original link:
I wonder if there really is roll oversteer geometry in the car.
Roll oversteer is a geometry thing. From the original link:
Without changing spring rates, but by changing rear suspension geometry and a carefully applied program of anti-roll bar development and bushing alterations the stability and handling of the 86 have been transformed. All of this has been achieved without changing the playful nature of the 86 in general driving conditions. High speed handling is now up there with the very best sports coupes around, and this is reflected in the lap times and general performance that WR86 delivers.
#16
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,950
Total Cats: 1,003
So let's break this down. Intake should be $400max , assuming it replaces virtually all intake tubing and includes proper heat shielding/box with high quality materials.
Cat-back: another $400 or so, on the expensiveside still. Up to $800 total.
MMid pipe: maybe $$300? $1100 total...
Header: if its a grand, which is very spend for a header, that brings the total to $2100. So... with overpriced standard parts, that's $1900 for a tune and installation.
That's what I like to call ballzing ridiculous.
Cat-back: another $400 or so, on the expensiveside still. Up to $800 total.
MMid pipe: maybe $$300? $1100 total...
Header: if its a grand, which is very spend for a header, that brings the total to $2100. So... with overpriced standard parts, that's $1900 for a tune and installation.
That's what I like to call ballzing ridiculous.
#19
So let's break this down. Intake should be $400max , assuming it replaces virtually all intake tubing and includes proper heat shielding/box with high quality materials.
Cat-back: another $400 or so, on the expensiveside still. Up to $800 total.
MMid pipe: maybe $$300? $1100 total...
Header: if its a grand, which is very spend for a header, that brings the total to $2100. So... with overpriced standard parts, that's $1900 for a tune and installation.
That's what I like to call ballzing ridiculous.
Cat-back: another $400 or so, on the expensiveside still. Up to $800 total.
MMid pipe: maybe $$300? $1100 total...
Header: if its a grand, which is very spend for a header, that brings the total to $2100. So... with overpriced standard parts, that's $1900 for a tune and installation.
That's what I like to call ballzing ridiculous.