Mbc Instalation
Ok im getting my MBC soon and i know to and from where it hooks up to but what i dont know is what do you do with the line that y's off into the turbo and the wasegate actuator, becasue instead of the wastegate actuator hooked up to that its hooked up to the mbc, so do you just plug the spot where it came from or also i heard you take it all out and plug the spot where it goes into the turbo. and then plug the turbo line and intake line? and since the mbc creates a y spot at the bov how do you do that or is there another way? This is for my 96 talon tsi awd.
|
do you have a boost gauge yet? if not start there. if you do it will install between compressor housing and wastegate can. I don't think you should be plugging any lines
|
ya but the wastegate can is hooked up to something else so what do i do with what it came from.
|
alright never mind i read instructions at my dsm forum thank you though.
|
I would recommend installing a boost gauge before turning up any kind of boost..... not like an MBC will help you without a BOV being installed first... because your stock BOV will just leak anyway...
|
i know dont worry all this is on the way
|
miata99 this is for the talon if so remove the turbo silencer before the intercooler,and see where that bringd you.
|
What silencer are you referring to?? Its located in the intercooler piping? The only silencer I can think of is the air canister silencer and those are only located on 1gs.
2g's have the boost restriction little sleeve but thats in the vacuum lines. |
well actually the MBC hooks up to the WGA and the compressor housing so its a very simple install. I just got it today and read the directions and loked it over. I also got my bov today but i need my intercooler piping to hook that up.
|
All times are GMT -4. The time now is 03:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands