Need some PS help
 

I'm starting some winter projects on my bike and one of them is recovering the seat. The thing is giant though, and would probably still be fine without some of the foam, and I think it would look a little better anyways.

Could someone use one of the below images and take the lip in the back off, a LITTLE off the back seat, and a little more off the front? You can see the frame rail in the first picture, that's about as low as I can go, except the back has a tall bracket design, so I can't go as low. Thanks fellas!

http://i228.photobucket.com/albums/e...ictures002.jpg
http://i228.photobucket.com/albums/e...thhelmet-1.jpg

Thanks, especially for the dildo, I forgot to mention I wanted one, but you put one on without me even asking!

And I should have been more specific. I'd like it shorter from top to bottom, not front to back.

http://img38.imagefra.me/img/img38/7...8m_8593cc3.jpg

Just how short are you that you're looking to drop the seat on a minibike with tall pegs?

It's not a mini bike! 700cc 400lb 80's monster.

My idea is essentially about like your second picture, sans dildo, but it'll still slope up to the top of the rear cowl, and the whole thing is about an inch shorter than I was thinking. Some where between your second picture and the original.

The rear suspension has been raised some, and the pegs are the ones seen in the picture of the all black version.

P.S. Thanks for keeping the all-black theme.

I'm fucking dying :bowrofl: