I need to slow down a 120V muffin fan. Resistor?
12-20-2011, 09:31 PM
#1
Elite Member
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: Pikeville, TN
Posts: 3,038
Total Cats: 27
I need to slow down a 120V muffin fan. Resistor?
If I wanted to slow down a fan (think of a PC power supply fan - but 120V) I could probably put a resistor on it. What size? I'm probably looking to run it 50% speed.
Thanks!
Thanks!
Reply
0
0
12-20-2011, 09:51 PM
#2
Elite Member
Join Date: Jul 2005
Posts: 6,420
Total Cats: 84
If it's a brush motor you can do it. How many amps is it rated for?
If it's an induction motor you can't. you'd have to run it at half voltage and half frequency. I'm gonna guess it's an induction motor, because brushes would result in a short life.
If it's an induction motor you can't. you'd have to run it at half voltage and half frequency. I'm gonna guess it's an induction motor, because brushes would result in a short life.
Reply
0
0
12-20-2011, 11:46 PM
#4
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
Since it's single-phase, wouldn't it be a shaded-pole motor? If so, any off-the-shelf fan speed controller (eg: from the fan section at Home Depot) would work, would it not?
Reply
0
0
12-21-2011, 12:21 PM
#7
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
It's a catch-all for the sort of fans that you might put in the case of a PC, or which is pictured above in post #1.
The name originally comes from Gerald R. Muffin, a Scottish inventor who first designed fans in this form-factor in the early 1920s for use in
I'll disclaim this by reminding the audience that magnetics are not my strong suite. But from what little I have read on the subject, any triac-based controller ought to work. Clip the AC voltage and the motor will slip.
The name originally comes from Gerald R. Muffin, a Scottish inventor who first designed fans in this form-factor in the early 1920s for use in
I'll disclaim this by reminding the audience that magnetics are not my strong suite. But from what little I have read on the subject, any triac-based controller ought to work. Clip the AC voltage and the motor will slip.
Reply
0
0
12-21-2011, 03:51 PM
#10
Elite Member
Join Date: Jul 2005
Posts: 6,420
Total Cats: 84
I take what I wrote partially back. Apparently some cheap shaded pole motors driving fans work OK with triac based fan speed controllers with limited speed reduction (maybe down 60% of orig speed). Watch out and check the motor for overheating. They can also hum BTW. Don't use a light bulb dimmer.
An autotransformer stepping down from 120 VAC to like 80VAC may work better. Dunno where you would get one small and cheap tho.
An autotransformer stepping down from 120 VAC to like 80VAC may work better. Dunno where you would get one small and cheap tho.
Reply
0
0
12-21-2011, 05:42 PM
#13
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
Well, yeah. Obviously if the fan in question can be replaced, the easiest course of action is just to find a new fan of the same size with the properties that you want. Even AC muffins can be ordered in all sorts of different speeds: http://search.digikey.com/us/en/cat/...ans-ac/1179729
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
Rudes333
Miata parts for sale/trade
17
11-05-2015 01:16 PM
Rudes333
Miata parts for sale/trade
7
10-16-2015 01:52 PM
JacksonRacingEngines
Engine Performance
10
09-10-2015 09:52 AM
