airbrush1

my car just either liquifies the tires or bogs down....... If I could hit a 2.0 60ft, I'd hit 12's as long as I made all my shifts.....

fmowry

iTrader: (8)

%90 of stoplight racers can't launch with a tree on a track.

Frank

cueball1

iTrader: (13)

I want to see this race on PINKS!

Splitime

iTrader: (24)

I'm unsure how to read this... We are talking about track 60fts... and you make comments about street racing.

If its at me... I only race on track... typically only roadcourse... but I find the dragstrip an amusing visit every once in awhile.

I was merely commenting that I find it wierd that the Miata guys aren't pulling better 60fts. The benefits of rwd weight transfer just seem like an awesome advantage... even though the cars balance probably negates some of the typical weight transfer.

I've yet to drag the miata... but I found it launched quite well at the one AutoX I drove it at last summer.

If the comment wasn't at me.. because of the FF car etc.... what do you mean by it? How does it relate to talk of launching a miata at the track and 60ft times?

or... is it to the miata guys pulling the not so hot 60fts... calling them out on their stoplight escapades?

Markp

It is somewhat hindered by the IRS rear which is suboptimal for drag racing. It doesn't launch nearly as well when applying 300 RWHP to a 205/50/15 street radial.

Mark

Splitime

iTrader: (24)

I guess the issue is tire then and finding a wider/sticker solution.

300 and a 205 street tire can definitly cause issues off the line. My 195s and under 200hp were a workout to get to stick for the 2.1 60s.

I wonder what a wider street tire... or a DR or even a nice slick could do though. I also wonder... how does even the 7inch rearend hold upto that type of abuse.

bripab007

The half-shafts and transmission will break before the 7" rear.

Newbsauce

iTrader: (2)

I don't really understand why everyone here seems to be running the 205s. I have 205s now and I'm really looking to do some 225 or 245 with rolling or flaring. Is there a benefit I'm missing to the 205s? Also, isnt there a slight disadvantage to the 7" torsen rear based on the fact it takes precious time for the torsen to engage compared to say the RX-7 clutch type or a welded diff?

fmowry

iTrader: (8)

Most guys, not just in Miatas, think they're the fastest, etc and look at magazine numbers figuring they can duplicate them and then get the drag strip and can't drive for ****. Drag racing takes practice. Tire pressures, RPMs, feathering the clutch to avoid wheelspin, not bogging, etc. Couple that with the fact that very few boosted Miatas ever see a dragstrip, and you've got bad 60 foot times.

Bottom line is, if a person comes onto a car forum and asks if they can beat so and so car at the dragstrip, they've probably never been to a dragstrip and their 60 foots will show it. The good thing is, the cars they are racing probably have never been to a dragstrip either.

What the hell is an FF car? Fast and Furious?

Frank

Braineack

iTrader: (62)

Gran Trusimo talk? Front engine, Front wheel drive?

fmowry

iTrader: (8)

As opposed to FWD, rear engine or FWD, mid engine?



Frank

Splitime

iTrader: (24)

FF - front engine, front wheel drive (as braineack said)
FR - front engine, rear wheel drive
MR - Mid engine, rear wheel drive
AWD... sorta sells itself.

Thanks for clarifying what you meant btw, as always the internet is a fun place to say what you mean... and for others to understand what you say.

And I agree with you completely.

cueball1

iTrader: (13)

Tire size, IRS and lowered with stiff springs all hurt. Miata guys tend to be road course guys, if you're a 1/4 mile guy it's not likely you have ever considered driving a miata. It's just 2 different groups. The few that get to the dragstrip is usually just for fun on a friday night. The miata guys that take the 1/4 seriously and build for it are far and few between. Maybe a couple dozen nation wide.

Mymiataflys

I made about 20 passes a couple of years ago. MY best 60' was 2.0 . obtained by holding the rpms at 4to 5K and leting out the clutch slowly , ie.lots of clutch slipping and then rather slowly flooring it. If you don't have any experience trying to launch a turbo miata then I would reccommend practicing. probaly could do it anywhere without a timing device because when you get it right you will know it but it is hard on the clutch, and very hard on the car if you try dropping the clutch since you either get wheel spin or wheel hopping, and with the drag radials it will most likely be wheel hop

Markp

My drag radials are 225's, I just didn't run them yet.

Mark

Ben

iTrader: (33)

uh oh, NHRA says that covertibles under 14 seconds require a roll bar...??
I don't know how that applies to my car if I had the hardtop on? or if I can even fit in there with a helmet. hmm

Braineack

iTrader: (62)

leave it on and they wont say anything, tech inspections are usually a fat redneck with a beer and clipboard who has you sign and writes a number on your window.

Atlanta93LE

iTrader: (5)

I once got turned away because I DID have a full roll cage (in the race car). The tech guy figured the car was fast, and said they didn't want to deal with fast cars that day.

lazzer408

iTrader: (1)

How do you keep the wheel hop to a minimum if you spin on launch? My miata (and all my friends) have aweful wheel hop.

hustler

iTrader: (6)

ladder bars