Why has no one done a boxer swap?
#24
The motor is ~31.
We have ~27 between the rails.
Also the mounting, it would hang mostly in front of the front wheels.
Even if you somehow managed to stuff it in there, it would require pulling the engine to get to the plugs, and the car would have the weight distribution of a truck. And that's besides the fact that the ammount of custom fabrication needed would probably cost more than the car and the engine combined.
of all the people here I should be the one most excited to do something like this since I love subaru's, but its just not even close to realistic.
We have ~27 between the rails.
Also the mounting, it would hang mostly in front of the front wheels.
Even if you somehow managed to stuff it in there, it would require pulling the engine to get to the plugs, and the car would have the weight distribution of a truck. And that's besides the fact that the ammount of custom fabrication needed would probably cost more than the car and the engine combined.
of all the people here I should be the one most excited to do something like this since I love subaru's, but its just not even close to realistic.
#25
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
I think I'm gonna do a 3JZ-GTE, chop the firewall and move it back 12 inches, then cut a shifter hole where the fuel and trunk release goes, and run linkages to the front of the trans tunnel.
#28
Want fries with that?
Thread Starter
iTrader: (3)
Join Date: Oct 2009
Location: Twin Cities, Minnesota
Posts: 2,011
Total Cats: 2
k gaiz imma put two vetacks in the trunk but my question is would the flux capacitor fit into the differential housing if i did that?
kthx.
btw i had a handa b25d5 with over 9000 horsepowers so i definitely know what im doing
kthx.
kthx.
btw i had a handa b25d5 with over 9000 horsepowers so i definitely know what im doing
kthx.
#29
do you plan to keep all the a/c and power steering ****? do you also plan to use the awd setup? you can weld the dif to make it rwd, but if you really want an EJ, why not go AWD? there's tons of support for the drivetrain, but the fab work that will be required will nothing short of insane. Insane is good though. If you find a wreck wrx or hell, even a older RS, you'd be ahead of the curve. all you would need then would be hundreds of hours of fab time and misc parts to make it work.
AWD turbo Miata? I jizz in my pants at the thought.
AWD turbo Miata? I jizz in my pants at the thought.
#30
This thread needs more pink body panels.
I've stayed up at night thinking about neat swaps for every vehicle I've ever owned, or thought about owning...and I'll admit the Suby boxer comes up very few times. I'd consider it for a VW if the tranny is at all possible to work out, or for a specially made kit car a la Joe Perez.
I'm convinced the FE3 is the best out there swap. Very feasible...very cheap, easy to fab, and "throwaway" engines safe to 5-600whp.
I've stayed up at night thinking about neat swaps for every vehicle I've ever owned, or thought about owning...and I'll admit the Suby boxer comes up very few times. I'd consider it for a VW if the tranny is at all possible to work out, or for a specially made kit car a la Joe Perez.
I'm convinced the FE3 is the best out there swap. Very feasible...very cheap, easy to fab, and "throwaway" engines safe to 5-600whp.
#37
While you can manipulate images and really change **** around in Adobe Photoshop, if it can be done in MSPaint, it can be done in real life.
Proof that the boxer engine will fit in a Miata:
After proving the boxer engine will fit, I went a head and tested a couple other theories I had in mind:
Proof that the boxer engine will fit in a Miata:
After proving the boxer engine will fit, I went a head and tested a couple other theories I had in mind:
#40
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,652
Total Cats: 3,011
Hey, has anyone thought of an air cooled VW engine swap? Front engine, rear drive, stock Miata transmission, adapter plate and at approximately 60hp it sounds like a real win. Seriously, why has no one ever thought of a swap like this? You even get the benefit of getting rid of the radiator. Win win.