working on honda's sucks!!!!!1
 

I've been out in the cold for the better part of 4 hours today, and an hour and a half yesterday re-installing the jackson racing supercharger on my brother's RSX type-s...... WHAT A PAIN IN MY ASS!!!!!!!!!!!!!

Maybe it's because I'm a big gorilla type with large man hands..... but I have to say that honda played a cruel joke on the US market when the wedged that motor in that car that way..... Add a blower to the mix..... and you might as well give up.....

And the damn things are delicate as hell too! tourqing down one of the intake manifold bolts resulted in a snapping sound.....and then endless spinnage. Not a broken bolt mind you..... but ALL THE THREADS IN THE HEAD GAVE WAY AT ONCE!!!!!!!!!! What the hell is that???????????? I didn't even tighten it that hard!!!!!!!!!!! ARGHHHHHHHHHHHHHHHHHHHHHHHHHH!!!!!!!!!!!

So we put a more coarsely threaded bolt in.... okay that worked..... but now it's running like it has a massive Vaccuum leak, which I KNOW IT SHOULDNT.... because I triple checked everything b4 startup..... So we head up to the shop that I had tune my car for some advice.... owner says it sounds like it might be a stuck IAC (idle air control), so take the throttle body off and unplug it and re-plug it to see if that was the issue.....

so we leave.... we're sided by side, and my brother can't resist getting into it.... he slams the throttle, blows by me wide open..... blowing black smoke..... and at the light we pulled up to....
the car is running fine??!?!?!?!?!?!?!?!?!?!?!?!? FREAKIN IAC UNSTUCK ITSELF!
Tell him to get into it because of the smoke from last time..... this time no smoke.... must have been dumping fuel because of the IAC......



in short..... honda's drive me NUTS!!!!!!!!!!!!!!!!!

I'm much rather work on a Honda then a Dodge Caravan anyday...

working on just about ANY van is a PITA..... Imagine working on a HONDA odyssey!

Mazda MX6 LS (v6)
Toyota MR2

ew

All my days of working on Hondas were pretty easy. I did my swap in 3 days in a 1 car garage with a floorjack and hand tools, first swap and fired on the first try. Hondas are easy.

Like legos...I swear.

But the RSX is hard to work with...easy to put together, but its just so damn tight with any FI in there.

I love hondas for the simplicity and fact you can do everything on them with a small tool set and a jack. And I mean everything.

my buddy blew his b16a in a '91 hatch last week, going from 3rd to 2nd at 100mph i was behind him and all four lanes went BLACK i couldnt see anything. but luckily mommy and daddy loaned him 1800. pshhh damn rich people

The Rsx is an Acura not a Honda, it doesn’t matter I you put a Honda motor in it and a Honda name plate its still a Acura. Oh and the Acura MDX sucks to work on. So do jetta's, any Lexus, BMW, or Mercedes.

its a honda over there...or was till last year.

As said above me... its a Honda.

Acura is just a rebadging for the luxury line.

Everything in that car and on that car... is made by Honda....

heh. i hear this.

anyone have a good lead on cheap Apexi WS2 exhaust or maybe RSR ex-mags for a 98 DX coupe? gf's car fallin apart. :(

I'll ask a friend...btw, that Integra I picked the wheels up in has the RSR Ex-Mag exhaust on it...its amazingly quite but nasty when you up it up.

working on the miata pisses me off. I don't know anything about them. Fortunatly the miata never breaks down, so you never have to learn about it.

So.. you're saying Acura isn't a luxury line created by Honda in 1986 to sell more luxury vehicles to the US? :ugh2:

I do agree with you about Lexus though, the RX300 has one of the worst oil filter placements ever.

Well Lexus and Toyota and the same but Toyota is still totally different.

I find it hard to believe that it could be any worse than the I4 Mx6. Right in the middle of the motor, up high, on the BACK. You have to reach both arms up between the crossmember and the exhaust, and you can _just_ get to it.

Try working on a Nissan 300ZX. That sucks.

OMG...FTL.

Its an all day job changing spark plugs...off come the intake mani, fuel rail...etc...gay.

Thats totally not how a sports car should be built.