Insert BS here A place to discuss anything you want

Yet Another Gun Thread

Thread Tools
 
Search this Thread
 
Old 06-06-2012, 02:57 AM
  #2101  
Elite Member
iTrader: (6)
 
TorqueZombie's Avatar
 
Join Date: May 2011
Location: Albuquerque, NM
Posts: 1,656
Total Cats: 64
Default

Originally Posted by samnavy
The "what's the smallest round you would carry" question is more common than "Ford or Chevy".

We all know bottom line is shot placement. Yup, you can take a couple .45's to the chest and walk away fine... or a .25 to the leg and bleed out your femoral in a few minutes.

A guy who takes 3x .357's the chest and still swings a bat at you means you get to shoot him at least 2 more times. It's also falls into the category of "if I'm going to plan for scenarios this far off the curve, I should consider never leaving my bed again."

When you do all the homework on Caliber/Capacity/Brand/Type/Ammo/CarryMethod/Penetration/Expansion/Placement/etc... what you come down to is simply playing the odds.

The odds are if you ever have to draw and fire, it will be against a single perp. If you want to play the odds even further, it will be in low'ish light, he will have a weapon of some kind, and it will be at extremely close (if not point-blank) range.

The next variable is simply what you're willing to put up with carrying. If your ideal carry weapon is small, then a 5-shot .357 snub with a grip-laser is the ultimate CCW.

If you want more ammo, then a single-stack 9mm.
If you can go with a larger gun, then a Glock 30.
If you can go larger, then a Glock 23.

This is open for debate, but the odds are that if you ever have to fire, it will be against one dude, at night, he won't be carrying a gun, he will be within arms reach, and you will fire one, maybe 2 shots. A .357 snub with a Crimson Trace grip can't be beat if you play the odds.
In honor. My mother in-law gave me this earlier this year, Taurus .357. Like it better for carry than my Glock 23. The Glock was great for open carry in NM, but this little thing I can tuck anywhere. I'm not a very big framed guy, little soft these days, but a sorta small frame.
EDIT: Had a few and forgot the pic
Attached Thumbnails Yet Another Gun Thread-2cw5p.jpg  
TorqueZombie is offline  
Old 06-06-2012, 02:58 AM
  #2102  
Elite Member
Thread Starter
iTrader: (11)
 
elesjuan's Avatar
 
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Default

Any of you fellas have a holster mounted in your Miata anywhere?

Have been thinking about ordering something from Texas Custom Holsters or buying some crappy Fobus paddle holster to screw down somewhere but wanted to see if anyone else has anything already dreamed up?
elesjuan is offline  
Old 06-06-2012, 03:04 AM
  #2103  
Elite Member
iTrader: (6)
 
TorqueZombie's Avatar
 
Join Date: May 2011
Location: Albuquerque, NM
Posts: 1,656
Total Cats: 64
Default

For the Glock in NM I couldn't sit in the Sparcos with a open carry. Where the center console/dash ends near the drivers calf I could clip my BlackHawk there. Had the little disk quick release thing they make. Would just disconnect and reconnect it there on a belt type clip. But, to be honest I liked my soft holster and would just wedge it between the seat and the tunnel. It is an GlOck 23 RTF and the grip is like velcro on the interior carpet and seat, and the soft holster had enough give to just callapse in the seat and not bother my sweet baby soft virgin hips.
TorqueZombie is offline  
Old 06-06-2012, 01:01 PM
  #2104  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

you actually open carried? are you morbidly obese?
pusha is offline  
Old 06-06-2012, 04:22 PM
  #2105  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

I like guns that go braaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaap
pusha is offline  
Old 06-06-2012, 08:55 PM
  #2106  
Senior Member
iTrader: (1)
 
mx5autoxer's Avatar
 
Join Date: Dec 2008
Location: Manassas, Virginia
Posts: 1,242
Total Cats: 57
Default

There's nothing wrong with my Kahr, but its hard to hit anything with it. You have to use a lot of KY windage because the sights are not adjustable. I have a Don Hume ITWB holster I wear at 12 o'clock. I either put it between the passenger seat and tunnel or, more often, clip it in the little pouch thing on the driver door since I'm a lefty.

Actually I lied. There is something wrong with my Kahr. I went to the range today and I suspect the firing pin is getting weak. I had a couple primers get hit and not go off the first time with two different brands. That's never happened until the last two times at the range (both within the last month).
mx5autoxer is offline  
Old 06-06-2012, 09:11 PM
  #2107  
Elite Member
iTrader: (21)
 
rleete's Avatar
 
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,593
Total Cats: 1,259
Default

Stretch the spring. If this helps, you need a new one. If not, your pin is bent or worn down.
rleete is offline  
Old 06-06-2012, 11:06 PM
  #2108  
Elite Member
iTrader: (14)
 
GeneSplicer's Avatar
 
Join Date: Sep 2009
Location: Birmingham, AL
Posts: 2,101
Total Cats: 180
Default

kicking back, trying to pop a couple coons with my supressed GSG-5, freaking thing is super quiet with sub .22lr... and this in a populated neighborhood, lucky I got woods in my back yard.

Waiting for dead coon pics
GeneSplicer is offline  
Old 06-06-2012, 11:58 PM
  #2109  
Elite Member
Thread Starter
iTrader: (11)
 
elesjuan's Avatar
 
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Default

Originally Posted by GeneSplicer
kicking back, trying to pop a couple coons with my supressed GSG-5, freaking thing is super quiet with sub .22lr... and this in a populated neighborhood, lucky I got woods in my back yard.

Waiting for dead coon pics
Can't remember if I've asked your opinion on that GSG yet... How do you like it? Did you cut down the barrel ditching the fake can and thread it?


Originally Posted by mx5autoxer
There's nothing wrong with my Kahr, but its hard to hit anything with it. You have to use a lot of KY windage because the sights are not adjustable. I have a Don Hume ITWB holster I wear at 12 o'clock. I either put it between the passenger seat and tunnel or, more often, clip it in the little pouch thing on the driver door since I'm a lefty.

Actually I lied. There is something wrong with my Kahr. I went to the range today and I suspect the firing pin is getting weak. I had a couple primers get hit and not go off the first time with two different brands. That's never happened until the last two times at the range (both within the last month).
Bummer. Have been thinking about maybe getting a Kahr eventually because I like the trigger more than my Keltec..



Speaking of good triggers...



Smith & Wesson Model 695 in .44spl.
First time I've ever shot this gun, double action only, 25 yards, two handed standing. What a great buy!
Attached Thumbnails Yet Another Gun Thread-20120605_132628.jpg  
elesjuan is offline  
Old 06-07-2012, 12:57 AM
  #2110  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

I prefer Smith revolvers to Colts.
pusha is offline  
Old 06-07-2012, 12:58 AM
  #2111  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

Originally Posted by GeneSplicer
kicking back, trying to pop a couple coons with my supressed GSG-5, freaking thing is super quiet with sub .22lr... and this in a populated neighborhood, lucky I got woods in my back yard.

Waiting for dead coon pics
suppressed .22 savage bolt action does tight work

Attached Thumbnails Yet Another Gun Thread-img-20120603-00930.jpg  
pusha is offline  
Old 06-07-2012, 01:07 AM
  #2112  
Elite Member
Thread Starter
iTrader: (11)
 
elesjuan's Avatar
 
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Default




http://www.gunsandammo.com/2012/06/0...ered-in-22-lr/
Attached Thumbnails Yet Another Gun Thread-nazibeltbuckleimage1.jpg   Yet Another Gun Thread-nazibeltbuckleimage2.jpg  
elesjuan is offline  
Old 06-07-2012, 01:38 AM
  #2113  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

here is the German army buckle I have:



it's not as cool as a gun buckle but this one was brought back from my grandfather. it was the only "souvenir" he took from anyone and never would say why.
Attached Thumbnails Yet Another Gun Thread-img-20120607-00947.jpg  
pusha is offline  
Old 06-07-2012, 09:48 AM
  #2114  
Miotta FTW!
iTrader: (24)
 
Splitime's Avatar
 
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
Default

Note to self. Either plan a budget or don't tally up after building a new toy.

This new rifle better be awesome...
Splitime is offline  
Old 06-07-2012, 10:40 AM
  #2115  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

Originally Posted by Splitime
Note to self. Either plan a budget or don't tally up after building a new toy.

This new rifle better be awesome...
that's a new concept to you? didn't you own a project car?
pusha is offline  
Old 06-08-2012, 02:35 AM
  #2116  
Elite Member
Thread Starter
iTrader: (11)
 
elesjuan's Avatar
 
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Default

Originally Posted by pusha
here is the German army buckle I have:



it's not as cool as a gun buckle but this one was brought back from my grandfather. it was the only "souvenir" he took from anyone and never would say why.


Originally Posted by Splitime
Note to self. Either plan a budget or don't tally up after building a new toy.

This new rifle better be awesome...
I quit adding up money I've spent on projects a long time ago with few exceptions. Sometimes its better to just not know.
elesjuan is offline  
Old 06-08-2012, 08:10 AM
  #2117  
Elite Member
iTrader: (14)
 
GeneSplicer's Avatar
 
Join Date: Sep 2009
Location: Birmingham, AL
Posts: 2,101
Total Cats: 180
Default

Originally Posted by elesjuan
Can't remember if I've asked your opinion on that GSG yet... How do you like it? Did you cut down the barrel ditching the fake can and thread it?
I did cut the barrel and then Form 1 a can for it - I actually used the fake supressor body. It doesn't want lock back the hammer now some times (or something) - probably b/c of the shorten barrel not giving enough backpressure to cycle the action. It will load another round, but when the hammer falls it feels and sounds like more of one of those spring suction-cup pisols - with no indent on the rim of the case. Just haven't had time to look into it, been cycling by hand.

Before can, it worked ok with the right ammo - it was ammo picky.
GeneSplicer is offline  
Old 06-08-2012, 08:13 AM
  #2118  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

I really wish someone would start making affordable 9mm MP5 copies.
pusha is offline  
Old 06-08-2012, 12:47 PM
  #2119  
Elite Member
Thread Starter
iTrader: (11)
 
elesjuan's Avatar
 
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Default

Originally Posted by GeneSplicer
I did cut the barrel and then Form 1 a can for it - I actually used the fake supressor body. It doesn't want lock back the hammer now some times (or something) - probably b/c of the shorten barrel not giving enough backpressure to cycle the action. It will load another round, but when the hammer falls it feels and sounds like more of one of those spring suction-cup pisols - with no indent on the rim of the case. Just haven't had time to look into it, been cycling by hand.

Before can, it worked ok with the right ammo - it was ammo picky.
Cool, soemthing I'll look into. Is the magazine a bitch to load?

Originally Posted by pusha
I really wish someone would start making affordable 9mm MP5 copies.
Jesus, you and I both. Cut up KITS are like 1k and the receivers are a bitch to bend......
elesjuan is offline  
Old 06-08-2012, 12:59 PM
  #2120  
Elite Member
iTrader: (5)
 
pusha's Avatar
 
Join Date: Nov 2009
Location: Miami, FL
Posts: 7,330
Total Cats: -29
Default

oh the days when SP89s could be sourced for sears easily
pusha is offline  


Quick Reply: Yet Another Gun Thread



All times are GMT -4. The time now is 06:32 AM.