Atlanta People.... April 5th meet.
Well, the response was good, the location worked out perfect... so let's do it again!
Meet at 4PM until whenever. I think we were there 2-3 hours last time. Mellow Mushroom 3070 Windward Parkway Windward Plaza Suite A Alpharetta, GA 30005 Come one, come all. There is tons of parking, we won't get run off, good pizza, good beer... sweet. Maybe this time we can check out the frozen yogurt place. Should be a lot warmer even though weather was great last time too. After this one, we can talk about alternating with another location just to switch things up if we can find one, but for now, this works great. |
That location is good. Good parking lot, easy to get to, etc.
But I'm honestly not diggin on MM again. I don't like Pizza (I know that it's unusual). Want to do one of the other restaurants in that same parking lot? Failing that, we can eat on the patio and I'll step over to the sandwich shop next door. :giggle: |
lol, I've been to several MMs and have yet to order any pizza :)
Avacado hoagie on wheat is the only way. |
Originally Posted by kotomile
(Post 229190)
lol, I've been to several MMs and have yet to order any pizza :)
Avacado hoagie on wheat is the only way. |
Wife may be out of town that day...which would be nice ;)
|
Originally Posted by Ben
(Post 229191)
Hey man, why don't you drive up? It's only 2 hours.
|
Originally Posted by mazda/nissan
(Post 229200)
why don't you guys ever go to augusta that way it would be more accessible for us s.car. people... its only 2 hours :)
https://www.miataturbo.net/forum/vbg...etimage&id=671 |
Oh and next meet we'll bring the tripod for better pics lol
|
and I'll actually use my camera that was chillin in the glove. haha Just help me keep foo and his laptop away from my MS :giggle:
|
Stealth, you're in Woodstock? I'm not far from you then...Marietta, east of 75
|
Originally Posted by Stealth97
(Post 229241)
and I'll actually use my camera that was chillin in the glove. haha Just help me keep foo and his laptop away from my MS :giggle:
But FWIW, do you know of anyone else who carries a multi purpose butane torch in their trunk? :giggle: |
ehh, I really did not know whose idea that was :inout:
yeah that was quite gangster... despite the quickie job with a cold soldering iron it is still holding up fine, tape and all... I'll get off my ass one day and fix it right. The car did the same crap the next day BTW, there was a wiring issue at the ECU as well, for the AIT. |
Originally Posted by Ben
(Post 229191)
Hey man, why don't you drive up? It's only 2 hours.
|
I'm in, so is it MM or somewhere else?
|
Originally Posted by kotomile
(Post 229397)
You know, I just might. I just fired off my injectors to witchhunter so like, wanna help me squirt after the meet?
|
I know, I just "feel better" having someone help who's done it before. I'm sure I could handle it by reading TFM, but.. this would be like faster n stuff.
I'm in tho, and bringing a friend. |
Can't say yes or no for sure at the moment. But I am interested in making it this time around. No sudden trips to Athens that I know of ATM. lol
|
Yes, meet is still planned for MM. If some of you guys want to do some work on the cars, we can go back to my place and work on the cars/shoot some pool/ drink some more beers lol
|
You mean like drop a front subframe and fix a leaking oil pan? ;)
Count me in. :bigtu: |
Or fix my damned no-starts? ;)
|
I thought you had a "work-around". :D
|
I still haven't managed to get PalmEdit tweaked to edit cranking settings... :vash: Gimme an hour...
|
*cough* you have a laptop
I ended up only using my Palm once. I think it's in the glovebox. Maybe :dunno: |
*cough* it's even more busted than last you saw it. I'm not going to carry it with me everywhere I go until my cranking PWs are set.
|
Originally Posted by Atlanta93LE
(Post 232630)
*cough* it's even more busted than last you saw it. I'm not going to carry it with me everywhere I go until my cranking PWs are set.
|
I should stop threadjacking...but my laptop is nearly useless at tuning now. The lid doesn't stay open, it takes nearly an hour to fire up, and I can't see the darn thing with any sort of light. I'm looking into getting a new one, but money is an issue (as always). I'm thinking of picking up an old Toshiba Libretto for tuning.
|
Then buy a laptop from me lol. Ask Ben... he knows i got the right deals lol
|
Sheisse, that reminds me, my lap needs a new power supply.
|
what kind is it? I have ps's for most HP/Compaq/Dell and some Toshiba.
|
So what's the skinny? There's been a lot of talk about the 5th...what's the "schedule of events;" anybody actually meeting before/after MM?
|
kotomile should be stopping by my place to install his MS and detail cars. There will probably also be some time to blast through some of the back roads near me. You're welcome to come by... if so, I'll probably pick up a (mini) keg to make sure we're all good and refreshed. Oh, and I got an LM1 if you want to compare your WB against another.
|
Saturday is car day for me, so I'll swing by (assuming weather isn't too bad). PM me your address again...I think I lost it in my move.
|
Originally Posted by Doppelgänger
(Post 232755)
what kind is it? I have ps's for most HP/Compaq/Dell and some Toshiba.
|
Koto - i have one of those. I'll bring it to the meet. Or i can drop it off with Ben after work today and he'll have it when you get to his house.
All i know is im going to a meet in the morning, dyno'ing over at DL around lunch and then heading up to MM ~4 |
Mike--Sweet, drop it off by me, or maybe I can meet you for lunch today. Like at that Taco Bell right up by your house. :)
|
I will most likely be there pimping my stock ECU and 120hp like a mofo
|
weather is promising
regardless of the big lightening bolt
http://i158.photobucket.com/albums/t...ed/weather.jpg Party at Ben's? I still have no boost, and no NA tune. |
^^^ doesnt sound like a bad forecast..
|
Originally Posted by m2cupcar
(Post 237692)
regardless of the big lightening bolt
http://i158.photobucket.com/albums/t...ed/weather.jpg Party at Ben's? I still have no boost, and no NA tune. I'll pick up some brewskies and some meat to grill for lunch. Time permitting, I'll get some Ribeyes from CostCo (they're the best I've found locally by far). MMMMMM. |
Originally Posted by kotomile
(Post 237561)
Dell 5100, (square connector) though I might try to borrow a friend's laptop for the MS install.
Ben |
I was kidding- you've got koto's car to play with anyway. But I figured once that's done we could shoot some vids of the cars rolling - I got one of those cheapie cams.
|
damn - forecast sux now. Rain all day. :vash:
|
Originally Posted by Ben
(Post 237726)
Koto, Mike dropped a power supply for you.
Ben I'm running through last minute trying to tie up the loose ends before heading out. I'll need to stop somewhere and get some vacuum line for the MAP, also, what sort of filter can I use for the idle valve? I'm thinking one of those little foam jobs for a carb on a small-displacement engine? |
oh, your throttle pipe doesn't have a joint for it?
I've got your power supply here at my house. Not that you'll see this before you get here anyway. :giggle: |
WTF did you guys go? At least expected Ben to show up. We had 11 cars this time. Not bad.
|
My car wasn't running so well, and the idea of tinkering on the side of the road in the rain didn't make me warm and fuzzy inside. Hopefully weather is better next time.
|
Got a late start on Koto's car and it just to longer than expected (I'll let Koto fill in the details). But it started up perfectly a little after 8pm. :bigtu: When I left they were talking about installing injectors. :D
|
The rain cost us a lot of time, and then Koto's MS was not very happy. Eventually, it all did come together though.
See you bitches next time I suppose. |
Originally Posted by Doppelgänger
(Post 238818)
WTF did you guys go? At least expected Ben to show up. We had 11 cars this time. Not bad.
Originally Posted by m2cupcar
(Post 238841)
Got a late start on Koto's car and it just to longer than expected (I'll let Koto fill in the details). But it started up perfectly a little after 8pm. :bigtu: When I left they were talking about installing injectors. :D
Thanks a BUNCH to Ben and M2cupcar for their help and combined subject matter expertise, and to foundsoul for the advice over the phone! :) |
koto,
please show a few pics of how BALLER your intake and IAC pipes came out. |
Originally Posted by Ben
(Post 239331)
koto,
please show a few pics of how BALLER your intake and IAC pipes came out. https://www.miataturbo.net/gallery/f..._underhood.jpg I redid a couple things, I'll take a pic later. New filter (had one), heatshielding on breather hose, some insulation on the AFM plug, etc. |
All times are GMT -4. The time now is 07:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands