curly

iTrader: (25)

Good news is, vlad's motor is in dopples car, and runs.


Bad news, we discovered rice while bleeding the clutch.

It's certainly not for brake clearance...

And it's spread to the back wheels too...

hornetball

iTrader: (4)

"Minimizing lug thread engagement" mod?

18psi

iTrader: (76)

I better see some 1000psi ALLOFIT vids of that motor soon.

greddygalant

iTrader: (3)

He's got a bunch of break in to do not to mention getting a proper tune.

Fireindc

iTrader: (13)

holy cow, are those 949 racing lug nuts? makes mine look perfect lol.

Doppelgänger

iTrader: (12)

I have bigger problems right now.

Drove the car home, fixed the exhaust rattle, drained/filled oil and replaced the filter...now I have no oil pressure, but the filter is full....FML.

greddygalant

iTrader: (3)

I feel as though this thread needs to go to the engine section for trouble shooting at this point, I can only imagine how gut wrenching this must be for Mike.

richyvrlimited

iTrader: (1)

Simple stuff first, wire fallen off the sender?

Fireindc

iTrader: (13)

What oil pressure sender do you have? A "real" or a "dummy" gauge? I know oem your car would have the dummy, but it's a nice upgrade to have the real sensor.

Also, i'm assuming the car was running when you saw there was no oil pressure? What did the engine sound like, excessively noisy? If there was really no pressure you would probably be able to hear it.

FRT_Fun

iTrader: (19)

The oil filter is right next to the oil pressure sensor IIRC...

18psi

iTrader: (76)

Lars had similar problem on exactly the same kind of engine:
https://www.miataturbo.net/build-thr...-49760/page24/

dunno if same or not, but worth reading about it.

also its really weird to me how it was fine then suddenly lost all oil pressure after the oil change. that's just really really not likely. if an oil pump or gears go, I'd think it would be during driving or boost or something. not working 1 second, turn off, and suddenly no pressure. that's just............weird

Something is clogged. Or stuck open.

flounder

Maybe knocked off the sender wire while taking off the filter?

FRT_Fun

iTrader: (19)

Let's hope this.

18psi

iTrader: (76)

Nope. He said he started it and it was super loud after the oil change, and it was barely squeezing oil out of the filter hole when he yanked it again. that = no oil pressure.

It might be stuck relief valve on the oil pump. Or something coulda got in there and clogged it. Or maybe the oem oil pump actually did take a dump, but I highly doubt that. A pump doesn't blow up with the engine off lol

Jeffbucc

My sender was bad along with a break in the wire continuity. Check it all before you jump to oil pump conclusions.

curly

iTrader: (25)

He also has an oil filter relocation kit, so he wasn't down by that gauge wire. Hopefully he can rule that out with a separate gauge soon.

18psi

iTrader: (76)

Its starting to sound more and more like the problem Lars had.

His was also a clog related to a sandwitch plate IIRC

Jeffbucc

If you'd like I can ship you my spare sender if you can't find the source. Just let me know.

curly

iTrader: (25)

He's in California with sun and ****.

I'm in oregon with Dopple and his car.

18psi

iTrader: (76)

lol