Videos: post your diy junk in action
The video frenzy has arrived. Here's a collective thread for DIY turbo videos. Post your car/setup in the reply title box.
|
90 Miata FE-dohc 2.0L t3/t4 48AR Stage3 60AR 50 trim 9psi
Intention was to log some closed loop boost control, but couldn't get the map to "stick". :vash: So all the vids are at 9psi. Tach is off by about 800 rpm up top. Yes, sound/wind noise = me :owned: That was with tape covering the entire mic port. Next time I'll tape foam over the port. Cam also has an external a/v in port, so I might try and see if it'll take just audio in... tho I doubt it, probably switched.
---------------------------- Was headed out to a big road that's dead this time of night, though that wasn't the case tonight... massive jam up. So I stayed near home. This was starting in 2nd at 2k and on through 3rd. ---------------------------- This is 1st gear from an idle roll, through 2nd. ---------------------------- 3rd gear from 2k rpm ---------------------------- 1st-4th from roll |
I want to go home and make a video now, and post it up tonight. It would be cool have all the members make videos of some pulls and shit.
|
Old video. One of the only ones I have that isn't a mess! lol
That was with the Greddy turbo @ 8psi. I cant wait to make some vids once the car is running again! :) Vash- |
This thread needs more videos. All you turbo people need to post them up!
|
So, if you have a Greddy, but have replaced literally everything but the turbo and manifold, can it then be considered DIY? :)
|
^^Nice.... If your vid worked.
|
sry - fixed.
|
Originally Posted by kotomile
(Post 310568)
sry - fixed.
|
Originally Posted by Arkmage
(Post 310577)
what bov is that? it's got a good volume and sound to it... mine is getting obnoxious.
|
90 1.6 T3 .42/.48 11psi
This season I'm going to have an HD camera and an external mic!
100% DIY :) |
Awesome vid and autoX course - that's the kind of course that get's you doing track events for sure. When you get your new cam, you can mount the old one facing out back or in the nose or on the side... Nice job.
|
Originally Posted by kotomile
(Post 310556)
So, if you have a Greddy, but have replaced literally everything but the turbo and manifold, can it then be considered DIY? :)
|
All times are GMT -4. The time now is 10:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands