Denoobification?
 

Hey all,
This is my first post on here. I currently own a 95 miata purchased last september, this is my first miata. Bone stock with 120k, everything on the car is great shape, besides a few parking lot dings. Today I ordered the Begi-s kit, and was told that it will be shipped within 2 weeks. Attachment 212008
Im starting with the Gt2554 for right now, as I dont need too much power and to be breaking it all the time.. That never happens.
I am not completely a noob to cars, I have had a handfull of vws, currently have a mk2 jetta TDI, and mk2 gti 16vt.
Looking forward to being a member here :)
Thanks

PS What kind of clutch and drivetrain life are you guys seeing with similar setups? (not racerboys)

Welcome! Description of car: check. photo: check. Put your location in your profile and all will be well.

And, profile updated. Very nice start.

As to the drivetrain, if you keep it below 240HP, the general consensus is that stock is fine (unless you beat on it), but the clutch needs to be upgraded above 200HP or so.

Since you have the 1.8 diff already, you don't need to worry about the rear blowing as much as those with a stock 1.6 rear. With the 2554, I'd just get a stronger clutch and upgrade the engine/diff carrier mounts.

welcome..you will enjoy your car SOOO much more with the begi..good luck with the install

You're "probably" gonna be OK on the stock clutch with the "S" at the base boost level. If you turn it up any more than the 6psi it comes with... you'll find the limits of the clutch... a few launches will show you.
Standard no-brainer clutch upgrade on a 1.8 good to upwards of 220whp (10-12psi) is an ACT-HD. If you're looking for stock pedal effort but need the extra clamping, then get the HD pressure plate and a 6puck sprung disc. Good to the limits of the 2554r.

Installing the clutch at the same time you do the turbo is highly recommended. It does away with a lot of the double efforts.

Here are some awesome threads by some random guy:
https://www.miataturbo.net/forum/showthread.php?t=5860
https://www.miataturbo.net/forum/showthread.php?t=20209

And before you turn up the boost... how about new tires/wheels/rollbar, maybe a brake upgrade(pads/lines)... hell, at least a voodoo knob.

And don't forget a new fuel filter before you drive the thing in boost... and make sure you've got a fresh tank of 93oct.

Thanks for all the input. Im kind of just hoping that the clutch can hold up for a while, it seems to be pretty solid with 60k on it or so. Then once it blows im going to put something more aggressive in, just not to the point that my leg gets soar driving the thing ha.
Haven't decided on my exhaust yet most likely temporarily I am just going to either:
A) Put a cutout after the downpipe to run wide open
B) Mufflerectomy
C) 2.5'' straight to stock muffler

Eventually I will have more option$, most likely a 2.5'' to a universal 3'' autozone replacement muffler; I want to hear music and passengers.

As for the rest of the car I have an oem hard top that needs a respray. I plan on putting some lower, stiffer suspension on, sway bars, and a roll bar. Its deffinetely going to need bigger brakes. And as for wheels its most likely getting cheap light ones with autox only tires. I am just a poor college kid trying to have some fun and putting a turbo on it seems like the most fun to dollar ratio

Nice how tos! People are saying about 6 hours for the whole process, thats about accurate?

Welcome.....just getting out and driving the thing to its limits as is, is the most fun to dollar to ratio. Adding a turbo just makes the smile bigger.
Good luck and keep us updated.

The 2554 I'm driving now is fun. The guy had it set to 4psi and it was intreging, but I turned it to 6psi. The clutch seems to be holding great except for when I gave my fat neigbor a ride. He won't be getting anymore rides.

Good luck!

The stock exhaust is not your friend. In the end, it's the overall diameter that's the biggest restriction. Don't waste your time gutting the stock muffler. A 2.5" midpipe+stock gutted muffler still leaves you with a 1.5" tip. You can make or buy on eBay a bolt-in test pipe that you will notice the improvement... but other than that, save for a 2.5" Enthuza.