hallo from germany
#1
hallo from germany
hello,
i´m the new member
my name is Rainer - but in english its easier using "ray".
i´m located far far away at the boring country of germany (but some nice roads and track like some autobahn-highways or the nürburgring) - around 60miles away from the nürburgring and spa (in belgium).
i like cars (hey the most members here like cars too ) - and owned some japanese and german cars over the years (Nissan Skyline & 200SX, Mazda RX-7 & MX-3 2.5, Subaru Impreza WRX, Audis, BMWs).
i bought my miata (MX5) 4 years ago. its not the fastest car, its not the best looking car, its just a fun car.
and after a failed supercharger project (eaton M45 from a mercedes benz slk) - with a miata unfriendly housing and toooooo much boost for the 1.6 B6 - its time for more power!
i´m looking for a t25 turbo or a saab td04L fitted with a begi exhaust header and custom v-band downpipe to my aftermarket cat and my supersprint catback exhaust
so heres some pictures (one at the nürburgring last year):
and a video made at spa (just one round):
sorry for my bad english - it isn´t as good as it should be after the the years at school
i´m the new member
my name is Rainer - but in english its easier using "ray".
i´m located far far away at the boring country of germany (but some nice roads and track like some autobahn-highways or the nürburgring) - around 60miles away from the nürburgring and spa (in belgium).
i like cars (hey the most members here like cars too ) - and owned some japanese and german cars over the years (Nissan Skyline & 200SX, Mazda RX-7 & MX-3 2.5, Subaru Impreza WRX, Audis, BMWs).
i bought my miata (MX5) 4 years ago. its not the fastest car, its not the best looking car, its just a fun car.
and after a failed supercharger project (eaton M45 from a mercedes benz slk) - with a miata unfriendly housing and toooooo much boost for the 1.6 B6 - its time for more power!
i´m looking for a t25 turbo or a saab td04L fitted with a begi exhaust header and custom v-band downpipe to my aftermarket cat and my supersprint catback exhaust
so heres some pictures (one at the nürburgring last year):
and a video made at spa (just one round):
sorry for my bad english - it isn´t as good as it should be after the the years at school
#5
ouch yes - in german we often say "Kat" instead of "Katalysator". So i wrote "cat" (like cat-less or cat-back) instead of "catalytic converter"
my fault sorry ^^
i got some big *** catalytic converters at my Audi S6... big enough for real cats
my coilovers ... don´t hit me - are racelands without the helper springs. driving fine for 4 years now. the only thing i´m missing are the adjustable dampers from my old tein or tanabe coilovers (other cars).
btw: good german - psyber_0ptix :-)
my fault sorry ^^
i got some big *** catalytic converters at my Audi S6... big enough for real cats
my coilovers ... don´t hit me - are racelands without the helper springs. driving fine for 4 years now. the only thing i´m missing are the adjustable dampers from my old tein or tanabe coilovers (other cars).
btw: good german - psyber_0ptix :-)
#6
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,650
Total Cats: 3,011
Ihr Englisch gesprechen ist besser als mien Deutsch gesprechen.
Wilkommen! I lived in Augsburg for two years when I was in Oberschule.
We can help you to make your car faster around the track if you are willing to learn. I would start with the suspension if I were you. You need more travel to get the most out of the shocks and springs.
Wilkommen! I lived in Augsburg for two years when I was in Oberschule.
We can help you to make your car faster around the track if you are willing to learn. I would start with the suspension if I were you. You need more travel to get the most out of the shocks and springs.
#8
i´m always willing to learn
maybe i´m replacing the coilovers next year with some HSD/BC Racing with adjustable dampers.
My VLSD works fine (after some work and fresh oil) and i got a front upper strut brace and a rear lower strut brace from a honda civic - instead of the mazda part ones (cause the car is too low for the mazda braces).
I´m going to replace the front sway bar with the bigger one from the NB model and the 235mm brakes with the bigger 255mm from the NB model.
that mods should be a good update in corners in my opinion - but i´m open for your ideas ;-)
more horsepower/torque and a better handling - makes a good fun car to an awesome fun car
maybe i´m replacing the coilovers next year with some HSD/BC Racing with adjustable dampers.
My VLSD works fine (after some work and fresh oil) and i got a front upper strut brace and a rear lower strut brace from a honda civic - instead of the mazda part ones (cause the car is too low for the mazda braces).
I´m going to replace the front sway bar with the bigger one from the NB model and the 235mm brakes with the bigger 255mm from the NB model.
that mods should be a good update in corners in my opinion - but i´m open for your ideas ;-)
more horsepower/torque and a better handling - makes a good fun car to an awesome fun car
#11
Yea ZF but I would have been all over. First job would have been Passau. I got a govt job instead which aligned a bit better with my career goals. I do miss Germany though. Weihnachtsmarkt/Christkindlmarkt, Starkbierfest, just the culture overall.
Ah ****, here I am getting all nostalgic.
Wenn du in der Nähe von D.C. bist, sag mir bescheid.
Ah ****, here I am getting all nostalgic.
Wenn du in der Nähe von D.C. bist, sag mir bescheid.
#12
Senior Member
iTrader: (2)
Join Date: Mar 2014
Location: Meridian, Mississippi
Posts: 628
Total Cats: 44
LOL.
I specified cat of the feline variety because of the mascot of this forum being the turbokitten... as seen here in a party hat
It may seem strange but many if not most of the people who post here like cats.
Keith
I specified cat of the feline variety because of the mascot of this forum being the turbokitten... as seen here in a party hat
It may seem strange but many if not most of the people who post here like cats.
Keith
#13
and some parts bought
OBX turbo header (i´m going to build some metal struts/bars(?) between the turbo and the B6 head)
FMIC Kit (got some parts in my garage - the other parts i bought some days ago from a guy in my city)
used exedy clutch - for the first tests
used T25 Turbo (OEM Nissan)
the next parts are:
375cc injectors (toyota MR2)
oil feed/water lines
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM