Hi, New 05' MazdaSpeed Op
Hi there,
Looking forward to sharing my ideas and experiences with you guys this year as well as reading up on your builds and stuff. I'll be picking up my new miata this weekend (a metallic grey MSM miata, bone stock w/ 75k miles). this Mazdaspeed will be somewhat of a pepped up daily driver when I'm done with it...I've got a couple things in mind that I'd like to do. |
cool
Do you have any definite plans for the vehicle? Mods? Expectations or goals?. Or just pepped up pepper? :dunno: |
Welcome to the site Deathtrap13, thanks for joining up!
|
Welcome! Post up some pics pwease!
|
Originally Posted by Girz0r
(Post 1224880)
cool
Do you have any definite plans for the vehicle? Mods? Expectations or goals?. Or just pepped up pepper? :dunno: the first thing that will happen: 1) MSPNP3 as soon as I get the $$$ 2) Already have a set of 425cc injectors. 3) soon after that a meth/injection set-up. intake and exhaust bits will be replaced with something similar to FM's "little enchilada" over time (probably going to piece together because it looks so simple) And I will post pictures as soon as I get it home, all of the pictures in this guys add have him in it...kind of weird BTW when I logged on I saw an add on the right for K-Y sex lubricant...I lol'ed |
I think a meth/water injection kit is completely unnecessary for your goals and only serves to add additional failure points and complication to the overall system. Not to mention if you tune the car in such a way that meth/water injection is necessary then you will have to ensure that tank stays full or you could damage your engine. Just my thoughts.
|
Originally Posted by Deathtrap13
(Post 1225211)
goal is to have 200+ HP....I know I'll end up with more than 200, but I just want a reliable, snappy little DD.
the first thing that will happen: 1) MSPNP3 as soon as I get the $$$ This should be your only purchase for a very long time, Learn to tune first!! 2) Already have a set of 425cc injectors. What Brand of injectors? 3) soon after that a meth/injection set-up. Meth injection is pointless for your goals! intake and exhaust bits will be replaced with something similar to FM's "little enchilada" over time (probably going to piece together because it looks so simple) Few things, One (wrong) way to look at modifications IMO is to buy each little piece until you have your complete package. I have learned that if I had actually waited and created a grand master build list I would of saved myself a lot of headaches. If I were doing your stockish MSM 200+ build I would do the FMII no electronics kit with a GT2560 And I will post pictures as soon as I get it home, all of the pictures in this guys add have him in it...kind of weird BTW when I logged on I saw an add on the right for K-Y sex lubricant...I lol'ed You're going to need it! :party:
Originally Posted by Ryan_G
(Post 1225226)
I think a meth/water injection kit is completely unnecessary for your goals and only serves to add additional failure points and complication to the overall system. Not to mention if you tune the car in such a way that meth/water injection is necessary then you will have to ensure that tank stays full or you could damage your engine. Just my thoughts.
|
thanks for the advice
|
1 Attachment(s)
NO!
https://www.miataturbo.net/attachmen...ine=1429736965 Answer my question noob!!! Talk moar about your vehicle purchase POSTPICSPWETTYPLEEEASE! We'll either ignore the 'dude' in photos or reuse for shenanigans. |
2 Attachment(s)
Originally Posted by Girz0r
(Post 1225576)
NO!
Answer my question noob!!! Talk moar about your vehicle purchase POSTPICSPWETTYPLEEEASE! We'll either ignore the 'dude' in photos or reuse for shenanigans. oh, trust me, the MSPNP will be purchased very soon. like probably within the same month. the injectors are MAZDA RX-8 yellow tops. Right now I am viewing the MSM base map in tuner studio...I'm curious as to how well it will with the initial base map being that the ECU is specifically for the MSM and the map is specifically for the MSM. https://www.miataturbo.net/attachmen...ine=1429792729https://www.miataturbo.net/attachmen...ine=1429792729 |
Car looks great - congrats!
|
Originally Posted by Girz0r
(Post 1225576)
NO
Answer my question noob!!! would the ECU actually have a reaction to sparkadvance/timing at the top end being that I ran a smaller nozzle and set it around 6psi? obviously it would lower intake temps a little |
Originally Posted by Deathtrap13
(Post 1226748)
Do you think WI would work with the stock ECU? My friend has a pressure switch operated kit, just uses a tee'd in pressure switch to a MAP line and a basic relay tapped into 12v powersource
would the ECU actually have a reaction to sparkadvance/timing at the top end being that I ran a smaller nozzle and set it around 6psi? obviously it would lower intake temps a little You don't need WI to get 200hp. A better intercooler will get you lower intake temps without the need to refill your boost juice. And the wastegate on the msm is pre set to about 8psi. You would need a lower wg spring to get a lower psi. Which I also don't recommend :nono: |
If you have no access to e85 and have terrible quality fuel in your area, you can do w/i for a little safety if you wish. But there are many things you can do before that which would be more important.
|
Originally Posted by 18psi
(Post 1227010)
If you have no access to e85 and have terrible quality fuel in your area, you can do w/i for a little safety if you wish. But there are many things you can do before that which would be more important.
MSPNP will be the first performance mod. anyways, I don't have the car yet!! I just got my check from the bank today, just have to meet up with the seller and take her home! I have to drive home through the Appalachian mountains...I'm going to pretend to be Richard Hammond in his MX-5 reviews on TG...I'm a die hard TOP GEAR fan BTW |
All times are GMT -4. The time now is 01:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands