When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1994
Its blown (rod knock)
And its has a borg warner turbo
I will be building an engine
The car came with a vvt engine
Head, im not gunna use for now
And just build the bottem to put forged internals
And slap on the head from the blown motor for now
I love red miatas; plan on painting the black parts?
The head is on pause for now, not too sure how to do it yet, and i dont have the money to put the head on as well, ima need a mega squirt 3 and not sure what injectors n rail to use
Tires are bald and suuuuuuper skinny fenders arnt rolled either
The head is on pause for now, not too sure how to do it yet, and i dont have the money to put the head on as well, ima need a mega squirt 3 and not sure what injectors n rail to use
Tires are bald and suuuuuuper skinny fenders arnt rolled either
Built bottom end, can't figure out how to install vvt head. Built bottom end, can't afford MS. What the hell is going on around here this morning? ?
The head bolts on the exact same way as any other head. I have a bp4W rail you can use with your stock FPR flipped. Just send me your address and pay for shipping, it's yours if you want it.
Get ID1000 injectors.
you run two wires to VVT, two wires. If you can't do that, it sounds like you are going to be using your stock CAS. I'd rather utilize the NB crank/cam sensors....but while you're at it, just wire in the VVT.
If you need more hand holding, then search Ultimate VVT in NA swap thread. You're wasting your time and money not using a better flowing head you already have in your possession.
Built bottom end, can't figure out how to install vvt head. Built bottom end, can't afford MS. What the hell is going on around here this morning? ?
Have all the parts to build bottom,
Short block is not hard to build, its straight forward and rather easy
I have a ms2 but need ms3 for vvt
Building a head is much more complicated
Valves, retainers, springs, cams cam gears, probably a port and polish, theres alot that i need to look into before i build the head
The head bolts on the exact same way as any other head. I have a bp4W rail you can use with your stock FPR flipped. Just send me your address and pay for shipping, it's yours if you want it.
Get ID1000 injectors.
you run two wires to VVT, two wires. If you can't do that, it sounds like you are going to be using your stock CAS. I'd rather utilize the NB crank/cam sensors....but while you're at it, just wire in the VVT.
If you need more hand holding, then search Ultimate VVT in NA swap thread. You're wasting your time and money not using a better flowing head you already have in your possession.
Im not going to just be slapping on the vvt head i want to upgrade the head itself
Springs retainers port and polish things like that
Im going to look into what i can upgrade from the head
What power level are you looking for? Are you sure you NEED to do all that stuff? just send it to a machine shop, have them inspect it, replace any guides that have worn and replace the seals. If you want oversized valves that's on you. Soviet made 450whp on a stock bp4w head. really. save your head build for a $200 VVT controller, or an MS3 and get this car moving.
You don't need cam gears. You probably don't need PnP. If you go through that much effort, you better be using a real turbo or it's just money poorly spent when you could be getting normal tires and suspension and a paint job.
What power level are you looking for? Are you sure you NEED to do all that stuff? just send it to a machine shop, have them inspect it, replace any guides that have worn and replace the seals. If you want oversized valves that's on you. Soviet made 450whp on a stock bp4w head. really. save your head build for a $200 VVT controller, or an MS3 and get this car moving.
You don't need cam gears. You probably don't need PnP. If you go through that much effort, you better be using a real turbo or it's just money poorly spent when you could be getting normal tires and suspension and a paint job.
Well i im looking to get over 320 on pump gas and probably e85 down the road
Im on borg warner 6258
I have wheels and tires coming in
15x8 28 on 225 hankook rs3
i can worry about the paint after its up and running
The picture is of the car as i got it, i havnt done anything to it yet
Well i im looking to get over 320 on pump gas and probably e85 down the road
Im on borg warner 6258
I have wheels and tires coming in
15x8 28 on 225 hankook rs3
i can worry about the paint after its up and running
The picture is of the car as i got it, i havnt done anything to it yet
That's a narrow wheel, so plenty of burn outs. Your 320 goal is easy on a stock head. What transmission do you have?
Yea just inspect/use the head, gain some mid range and worry about the other supporting mods.
If you need that fuel rail for your vvt swap, lmk. You just flip your stock FPR upside down and run the hoses to the front. I might have extra SAE to barb adapters I can throw in.
Yea just inspect/use the head, gain some mid range and worry about the other supporting mods.
If you need that fuel rail for your vvt swap, lmk. You just flip your stock FPR upside down and run the hoses to the front. I might have extra SAE to barb adapters I can throw in.
But he didnt ~need~ to to make power. He had a stock head, and OP is using a 6258. For his goal, he can leave the head untouched and just pour that money into injectors and fuel pump to get his car up and running in the first place.
07-27-2016, 02:33 PM
My new blown miata :)
0
