New Smurf!
 

Hi everybody,
So i'm new to this forum but im active on CR and heard great things about MiataTurbo. I bought my NA oct of 14 bone stock with 117k. Since than i have done bits here and there working my way to make it mine Items list includes
Harddog rollbar
kirkey pro drag
mishi dualcore
rev gauges
begi coolant reroute
FM frame rails
magnacore plug wires
coils
cheesy 002's
moss rebuild shifter kit
lip kit
new bumper matched
k&n filter adapter
momo wheel
custom panel wrapped vinyl diamond stitched
upgraded deck/speakers
overall just clean and bring to try to be show quality.
Lived the low fun and now raising a touch not much and putting together the turbo build. Current list of parts to install
torsen lsd, axles, driveshaft
mspnp
rx8 injectors
i have my full drain setup for turbo
hks bov and connector tube for it
parts i am buying to install
garrett gt2560r
fm turbo kit
act clutch kit
currently stressing over understanding vtps and ms.
So these are my plans thankyou for reading any input would be great! im new to megasquirt but my friend has built many cars that ive helped with and he is now helping me because obviously miatas are fun but more fun with power. on to a few pics


https://www.miataturbo.net/attachmen...ine=1454682457
https://www.miataturbo.net/attachmen...ine=1454682457IMG_20151019_205734 by todd wilson, on Flickr
https://www.miataturbo.net/attachmen...ine=145468245712170326_10153073722755689_730237053_n by todd wilson, on Flickr
https://www.miataturbo.net/attachmen...ine=145468245712113357_1509653536020151_6737864725640682760_o by todd wilson, on Flickr
https://farm2.staticflickr.com/1648/...f9f9687d_o.jpguntitled (2 of 2) by todd wilson, on Flickr

Welcome!

That is nice lookin car :bigtu: You're definitely keeping it clean.

Any shots of the engine bay?

Edit* Just found some on your Flickr... Dat matching blue valve cover is the tits, everything else looks cleaaan.

https://www.miataturbo.net/attachmen...ine=145468320620150708_192820 by todd wilson, on Flickr
and soon it will all be different but came with ac and all the goodies but i removed most everything and will be tucking more when i pull the motor to start the clutch turbo setup

I wish the paint on my car was in such good shape.

i've been enjoying your build trying to retain as much as i can with it, thankyou for the compliment my front bumper(came black replacement) has been repainted my trunklid is now replaced with a wingless and my finish panel (new one to me) is at a body shop getting color matched. Your build is amazing with that smurf i might bug you if thats alright with questions.

I tried to create as big a safety net with this motor as possible, lower compression, higher boost, less timing etc. Bug away, I'm still figuring things out.

its amazing where you have gone with your build im acutally restarting the read right now and i like to see that your also afraid or megasquirt.

I'm still afraid of megasquirt.

that doesnt make me feel anybit more comfortable

Despite being a little too stretched/flush for my taste, that looks really really good.

Just get a PNP version, and get used to it before going turbo.

i do have pnp just have to actually put it in, i dont drive the car from end of oct to whenever salt is gone and new wheels are in order probably 6ul's

I don't see a 1.8 rear end on your list. That is something that will be needed, and most likely sooner rather then later.

overall just clean and bring to try to be show quality.
Lived the low fun and now raising a touch not much and putting together the turbo build. Current list of parts to install
torsen lsd, axles, driveshaft
mspnp
rx8 injectors
i have my full drain setup for turbo
hks bov and connector tube for it

Ahh I missed that in the list. Check out this thread for a good way to boost your 1.6. He did everything in the correct order and his car has been doing good.

Thankyou ill look into that now!

Welcome to the site MaineMiata91, thanks for joining up!

Thankyou I believe your posts are whats going to help me make this work!! I mean if you want you could move closer its an option:idea:

Yay for more parts

Yes,
As above says
we bought garrett 2560r
flyin miata diy kit
bidding on act clutch
bought vtps, autometer boost
just bought the 15x9 jongbloed in silver
ugh still need
injectors sent out to be flow tested and new seals
and exhaust
is there anyway to change this to a build post? or just create new?
a picture cause thats what you guys came for
say good bye to stance boy
https://www.miataturbo.net/attachmen...ine=1455283941IMG_20151019_205435 by todd wilson, on Flickr

Start a new build thread in the build thread section.