Second miata, time to turbo
Hi guys,
My name is Joe and I just picked up a second 90 miata dirt cheap. My goal is to is to turbo it cheap, only looking for around ~150 whp. My fab skills are limited as is my knowledge of turbos, but I've got pretty good skills with the search button. I'll probably blow the car up, but that's the point of having 2. |
nice.
Pics? |
STS slut
http://farm5.static.flickr.com/4120/...7526544f_z.jpg No good pics of the new car. Most of the body is clean, actually nicer then my first, but it has one minor issue: http://i830.photobucket.com/albums/z...g?t=1285290764 Door opens and closes fine, car drives straight. I need to get get the frame checked. Worse case scenario is the car gets parted and I make money if there is more damage then I think. |
Oooh man I have the same hit on my right side.
Welcome to here. |
150HP is so easy to it. Even a greddy kit will take you there.
|
Originally Posted by dustinb
(Post 633843)
150HP is so easy to it. Even a greddy kit will take you there.
|
Originally Posted by allmybase
(Post 633886)
Easy is the idea. Start there and build up the power as I build up the supporting mods.
|
I'm not sure you guys understand this man's definition of cheap.
You can get one of the ebay cast manifolds for $140 shipped. Add to that $80 used injectors, $285 MS build, a used ~$50 turbo, home made DP from $20 in piping, and ~$100 in misc. feed and drain plumbing, and you've got a nice $675 turbo kit with the stock cross over tube reused. Another $140 will get a universal intercooler "kit" shipped to your door from CX racing. That's how I'd do it, upgrading as I had the money. I'd even consider an ebay manifold/dp combo if I could weld some braces on. Is this cheap enough? |
Two things to wath out for detonation and lean condition.. two different beasts
Detonation is way much advance timing, lean means bad tune Make it clear, recipe for error is a given by listening to what you are saying. I am on my fourth boosted engine, fiy, you have been warned. |
Originally Posted by curly
(Post 634064)
I'm not sure you guys understand this man's definition of cheap.
You can get one of the ebay cast manifolds for $140 shipped. Add to that $80 used injectors, $285 MS build, a used ~$50 turbo, home made DP from $20 in piping, and ~$100 in misc. feed and drain plumbing, and you've got a nice $675 turbo kit with the stock cross over tube reused. Another $140 will get a universal intercooler "kit" shipped to your door from CX racing. That's how I'd do it, upgrading as I had the money. I'd even consider an ebay manifold/dp combo if I could weld some braces on. Is this cheap enough?
Originally Posted by mazpr
(Post 634083)
Two things to wath out for detonation and lean condition.. two different beasts
Detonation is way much advance timing, lean means bad tune Make it clear, recipe for error is a given by listening to what you are saying. I am on my fourth boosted engine, fiy, you have been warned. |
All times are GMT -4. The time now is 06:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands