DIYPnP 01+ engine
#1
DIYPnP 01+ engine
I got my 00 swap to a 2005 engine started last night. The previous tune was used. It was idling ~14.0 to 1 before and now it's closer to 9 to 1 after the swap. I used the 2005 injectors which a little larger than the 99/00 injectors. Also it's very hard to start, it's like I have to use the "flood clear" to get it to start. Once it was running I leaned out the cells so it would idle closer to 14 to 1.
Does anyone have a 01+ MS2 tune I could look over to see what I might need to change to help with the cranking. I'm pretty sure it's getting to much fuel but I'm not sure. Tune is attached if anyone want's to take a peek. No datalogs yet.
Thanks,
Does anyone have a 01+ MS2 tune I could look over to see what I might need to change to help with the cranking. I'm pretty sure it's getting to much fuel but I'm not sure. Tune is attached if anyone want's to take a peek. No datalogs yet.
Thanks,
#5
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,976
Total Cats: 355
Try these values, left column is degrees CELCIUS, right column is %. I haven't been able to verify the 0C setting, there is no chance temperature in Athens, it's only a myth.
0 = 250
15 = 160
30 = 130
45 = 120
61 = 100
77 = 90
86 = 80
96 = 80
0 = 250
15 = 160
30 = 130
45 = 120
61 = 100
77 = 90
86 = 80
96 = 80
Thread
Thread Starter
Forum
Replies
Last Post