2 Questions: TS and Idle Tuning
 

First - In TunerStudio under Basic Settings. When I click "Fuel VE Table 1", shouldn't that display my fuel table? It doesn't do anything.

Second - Is this method of idle setup valid for a parallel install?

https://www.miataturbo.net/megasquirt-18/timing-idle-requesting-some-help-57133/

I'm not exactly sure where to begin with setting up idle if this won't work for me.

nobody?
 

So nobody else has had this issue? Is it user fail?

that's your main fuel table. unless you have the wrong firmware selected...

Right. The issue is that I can't view it except in "Tuning" mode. I was hoping to open it and make some changes to the table. Under "Basic Settings" it looks as though I should be able to click the table to open it, but when I do - nothing happens.

As it is I don't think I could even import a VE table if I wanted to as that functionality seems to be in the VE table view itself...which won't open for me. ...and yes I paid and registered TS. Wondering if I need to re-install the software or something...or try the latest beta.

your project is setup for the correct firmware?

Yep.

post your msq.

Here's the msq.

It strikes me that maybe I shouldn't actually need to do much for idle on a parallel setup. True? Or does my running 550s blow that theory?

you need to make sure your fueling and spark is good...the stock ECU handles the engine speed

I can open the fuel table, maybe your junx needs reloading

Freakin' weird..... I even reloaded and still have the same issue. Maybe I'll try completely uninstalling it. Will I be OK just saving the stuff in my project folder? I don't imagine there's anything in the Program Files\EFI Analytics folder I need to worry about, is there?

yeah save a copy of your project folder.

Yup, works fine on another machine. Guess I was just hoping it was a known issue and I could change an ini file to fix it or something.

Thanks for the help.

Just in case anybody ever has a similar issue:

I posted over on the msextra forums. Phil took a look and determined the table actually WAS opening - just on another screen... that I no longer had connected to my machine...

I renamed the tsuser.properties file and all was well.