90 miata with diypnp running 04 coils
 

I am half way thru the swap got the engine out.
Now I go to swap over the clutch thinking it is good. But no it needs at least a new clutch plate which I cant get till monday. SOOOO
Maybe I will use all my extra time I have set aside tomorrow for wiring up the 04 coil-on-plug ignition.
I have done some thread hunting trying but I am about to leave for the the night. Beers for one of the guys who helped.
Is there a thread that has step by step instructions.
Does any one have a link or step by step instructions.


Thanks for any help I get.

Well I f* up the swap. One of the studs cross threaded and stuck/broke of in the used begi manifold so that is going to the machine shop and the swap will not be complete till next weekend at the earliest. So while it sits I want to swap over to 04 coils. I searched for instruction but could not find them. Is it the same as wiring regular coil on plug. Should I use those instructions.

i found this link helpful Megasquirt Sequencer Coils

i figure i can run them batch anyone know if 01-05 coils have ignitors built in?
what can i do for tach. toyota cop has an output but do 01-05 coils. would the stock 90 dash tach work too?