mm0105 Will not Power Up
09-15-2015, 04:47 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Location: Morro Bay, CA
Posts: 52
Total Cats: 0
mm0105 Will not Power Up
Using a 2001 engine harness plugged into my mm0105 MSPNP PRO. Wired power through X-16 connector.
The MS will not display the 12v red led when power is applied. Power and grounds are good.
The check engine light blinks once and goes off when the MS is first turned on.
I've checked the wiring over and over, and am scratching my head. I even tried applying 12v through the optional connector...no go.
Thoughts?
The MS will not display the 12v red led when power is applied. Power and grounds are good.
The check engine light blinks once and goes off when the MS is first turned on.
I've checked the wiring over and over, and am scratching my head. I even tried applying 12v through the optional connector...no go.
Thoughts?
Reply
0
0
09-15-2015, 06:28 PM
#2
Junior Member
Thread Starter
Join Date: Oct 2007
Location: Morro Bay, CA
Posts: 52
Total Cats: 0
SOLVED: There are two W/L (white/blue) wires in the X-16 Connector. The small gauge wire is for the check engine light, and the larger gauge wire is for fuel injector power. I had them swapped....
50/50 odds.....LOST!
50/50 odds.....LOST!
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
