98 1.8 install
Hi,
After searching, Im coming up with not alot of info. I need to find some MS-1 install instructions/ECU pin-out for a 1.8 1998. I've got an LC-1 to install with it and the MS-1 is a DIY kit fully build and working on a stim. Cheers, Craig |
The problem is that the Miata was never sold as a 1998 model year in the US. Is this one an NA or NB body style?
|
it's an NB ;)
|
What Richy said! :laugh:
It's an NB and timing is off the crank. I'm guessing here, but if the 98 NB was never sold in the US, should I be looking out for the 99 NB ECU pin-out and MS-1 install instructions? I'll be wanting to install it parallel with the stock ECU as I believe the alternator is regulated off the crank angle sensor. Thanks, Craig |
Go MS-2, read
https://www.miataturbo.net/forum/t26882/ https://www.miataturbo.net/forum/t14847/ and especially the latest thread from Abe about his adapterboard. Greets |
Im not too keen on going MS-2. My requirements wouldn't take me beyond an MS-1 parallel install. I just want decent fuelling/ timing control for an intercooled supercharger install with the ability to bang in some larger injectors etc.
I don't see an issue with letting the stock ECU control the alternator and other boring stuff. I'm still struggling to fins a defined pin-out/install guide for my 1998 NB car :( |
That is how I did my parallel install as it was with the MS1.
MS1 install scheme 99-00 No guarantee though, it's just a little drawing I did for myself... |
With MS1, you will have to add an NA cam sensor (or a 36-1 crank trigger), as only MS2 can read the stock sensors.
|
Thanks for the schematic Zaphoid.
I've got a mk1 CAS for the back of the exhaust cam so hopefully I'll soon be on my way. |
All times are GMT -4. The time now is 09:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands