Looking at intake temps in Megalog
06-09-2015, 08:46 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB
Posts: 151
Total Cats: -12
Looking at intake temps in Megalog
I'm beginning to think I'm suffering from heat soak on my GM IAT. I've looked around for the answer to this question and think that the "MAT" should correspond. However.. My "Est air intake temperature" gauge on tunerstudio reads around 63C when I idle while my MAT reading from Megalog reads 46C at full boost.
So this discrepancy makes me think that MAT isn't the intake reading. Even if its manifold intake temperature, it shouldn't cool down that much before entering the combustion chamber. Either the MAT reading is wrong, or the IAT is off.
What gives?
So this discrepancy makes me think that MAT isn't the intake reading. Even if its manifold intake temperature, it shouldn't cool down that much before entering the combustion chamber. Either the MAT reading is wrong, or the IAT is off.
What gives?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
