Advice / protips on maps
3 Attachment(s)
Hello
I'm running a DIYPNP in a -99 NB 10ae euro-model. Had the ECU for ~week now, learning to tune it etc. Will be equipping the car with a m45 s/c in couple weeks. Atm the car is running quite good, acceleration and idle are smooth; with cold, and hot engine. Would appreciate any tips / feedback regarding my maps. The igntion map is DIYPNP stock map (for my specific car obviously), AFR table is generated with tunerstudios, and VE table is generated & autotuned. Also a log, if anyone has the time to check it out and point out anything obvious. https://www.dropbox.com/s/73nszg9rc1...8_17.08.22.msl Attachment 239141 Attachment 239142 Attachment 239143 VE map is still lacking in 4k+ rpm zone, 500-4000rpm cell change is pretty much all green. |
All times are GMT -4. The time now is 03:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands