Airbag light after MSPNP install?
 

I have an aftermarket wheel in my car and removed the driver's airbag years ago. I installed the resistors to fool the stock ECU to remove the flashing light.

This has worked for me with the stock ECU and the Link, but I guess the MSPNP doesn't like it.

Is there an easy fix or am I removing the airbag light bulb?

I thought the airbag had its own seperate computer?

Could I trouble you to share what exactly you did? I too installed an aftermarket steering wheel sometime ago and ever since I'm driving around with that flashing light. I asked around but no one had any idea about how to do that mod. I was even told that if I removed the airbag light bulb it would make a constant buzzing sound.

Thanks,

Rafa

climb under the dash. There's a small blue rectangular box positioned slightly above the steering column. There's a smaller blue box mounted right next to it on a bracket. The larger box is the airbag computer. The smaller box is the backup battery to the airbag computer. If you unplug the harnesses to both blue boxes, you will eliminate the airbag light and you will not get a buzz.

as for the mspnp causing an airbag light, FWIW, it did the same thing to me on my car.

Many thanks. My apologies fourwhls.

Thanks! You da' man!

got an aftermarket wheel in my 94 and did the resistor trick to fool the system. airbag light stays off and continues to stay off when i swap in my MSPNP.