Anyone have an msq for a high compression 1.8?
9.5:1, 1.8l, 1000cc injectors. I just need it to start up. I probably won't run it longer than thirty seconds since I have no sensors hooked up other than tach. Thanks in advance!
|
Why would you want to start it anyway if all you have is the tach hooked up? Lolwtf
|
Because I'd like to see if my wiring/tach input is solid
|
You didn't give any pertinent details, like NA/NB, or MS1/MS2/MS3, etc etc. All MSQs are not the same...
|
NA, MS2 V3, catless, 10 psi target (wastegate pressure).
|
Since when is 9.5:1 considered high compression?
|
Its higher than stock isn't it?
|
No, it is stock for 99+
|
It's a '94, I said NA. Could I possibly run a tune for an NB? I'm going to be messing with the tune, but I'd like to have a timing map that I know won't blow up
|
You run the tune you have the sensors for. If you have a 94 harness and sensors, run a 94 tune. .5 difference in compression isn't going to matter if you're just running it for 30 seconds. If you're really that paranoid, you can run a spark map from a 99+ (I can dig up one of my old ones, you don't want the one I'm running now since I'm running on 87 octane).
|
I'd really appreciate it thank you
|
All times are GMT -4. The time now is 08:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands